Loading ...
Loading ...
Loading ...
Other features
DRY operation
· Press the "MODE" button until the "DRY" indica-
tor light comes on.
· The fan speed or the temperature cannot be
adjusted. The fan motor operates at LOW speed.
NOTE:Keep windows and doors closed for the best
dehumidifying effect. Do not put the duct to window.
FAN operation
· Press the "MODE" button until the"FAN " indicator
light comes on.
· Press the "FAN SPEED" button
on
the remote
controller to choose the fan speed. The temperature
can not be adjusted.
· Do not put the duct to window.
AUTO operation(select models only)
· When you set the air conditioner in AUTO mode,
it will automatically select cooling, heating (Only
on models with heating), or fan only operation
depending on what temperature you have selec-
ted and the room temperature.
· The air conditioner will control room temperature
automatically round the temperature point set by
you.
· Under AUTO mode, you can not select the fan
speed.
HEAT operation(select models only)
· Press the "MODE" button until the "HEAT" indicator
light comes on.
· Press the ADJUST buttons "+" or " - " to select your
desired room temperature. The temperature can be
set within a range of 17°C~30°C/62°F~88°F (or 86°F).
· Press the "FAN SPEED" button on the remote
controller to choose the fan speed.
Wireless operation(Select models only)
·
Used to initiate the wireless connection mode. For
the first time to use wireless function, press the
POWER button for 3 seconds to initiate the wireless
connection mode . The LED DISPLAY shows 'AP' to
indicate you can set wireless connection. If connect-
ion(router) is successful within 8 minutes, the unit
will exit wireless connection mode automatically and
the wireless indicator illuminates. If connection is fai-
lure within 8 minutes, the unit exits wireless conne-
ction mode automatically. After Wireless connection
is successful, for some models you can press MODE
and UP (+) buttons at the same time for 3 seconds
to turn off Wireless function and the LED DISPLAY
shows 'OF' for 3 seconds, press MODE button and
UP(+) to turn on Wireless function and the LED
DISPLAY shows 'On' for 3 seconds.
NOTE: When you restart the wireless function, it may
take a period of time to connect to the network
automatically.
NOTE: Under AUTO mode, both the AUTO mode and
the actual operation mode indicator lights illuminate
for some models.
SLEEP/ECO operation
This feature can be activated from the remote control
ONLY. To activate SLEEP feature, the set temperature
will increase(cooling) or decrease(heating) by 1°C/2°F
(or 1°F) in 30 minutes. The set temperature will then
increase(cooling) or decrease(heating) by another 1°C
/2°F (or 1°F) after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it
returns to the originally selected temperature. This
ends the Sleep mode and the unit will continue to
operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY
mode.
FOLLOW ME/TEMP SENSING feature(
select models only
)
NOTE:This feature can be activated from the remote
control ONLY. The remote control serves as a remote
Constatnt Fan
operation
(Select models only)
·
In cooling or Dry mode, press the MODE button
for 3 seconds to turn on or off the constant fan
function. When the function is turned on, the
constant fan light will illuminate, identifying the
fan continuous run for cooling. When the function
is turned off, the constant fan light will go out,
identifying the fan cycle run with compressor stop.
Page 19
Operating
Instructions
FRESH operation(Select models only)
·
Press MODE and DOWN (-) buttons at the same
time for 3 seconds to initiate FRESH feature and
the FRESH light illumiantes on some models, the
LED DISPLAY shows 'On' for 3 seconds. The ion
generatoris energized and will help to purify the
air inside. Press it for 3 seconds again to stop the
FRESH feature and the FRESH light turn dark on
some models, the LED DISPLAY shows 'OF' for 3
seconds for some units.
Loading ...
Loading ...
Loading ...