Loading ...
Loading ...
Loading ...
Operating Instructions
Control Panel Features
MODE button
Selects the appropriate operating mode. Each
time you press the button, a mode is selected in a
sequence that goes from COOL, FAN, DRY, HEAT
(Select models only
), and AUTO(Select models only
).
The mode indicator light illuminates under the
different mode setting.
NOTE: On above modes, the unit operates the auto
fan speed automatically.
Used to adjust (increasing/decreasing) temperature
settings in 1°C/2°F(or 1°F) increments in a range of
17°C/62°F to 30°C/88°F (or 86°F).
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and
hold the Up and Down buttons at the same time for
3 seconds.
Up (+) and Down (-) buttons
Power button
Power switch on/off.
Power
indicator light
Timer indicator
light(only set by
remote controller)
LED display
Shows the set temperature while on cool,
heat or auto mode. While on DRY and FAN
modes, it shows the room temperature.
Shows Error codes:
E0-EEPROM error.
E1-Room temperature sensor error.
E2-Evaporator temperature sensor error.
E3-Condenser temperature sensor error
(select models only).
E4-Display panel communication error.
EC-Refrigerant leakage detection
malfunction(select models only).
Shows protection code:
P1-Bottom tray is full--Connect the drain
hose and drain the collected water away.
If protection repeats,call for service.
NOTE: When one of the above malfunctions
occurs, turn off the unit, and check for any
obstructions. Restart the unit, if the
malfunction is still present, turn off the unit
and unplug the power cord. Contact the
manufacturer or its service agents or a
similar qualified person for service.
NOTE: The following control panels
are for explanation purpose only. The control panel of the unit you
purchased may be slightly different according to the models. Your machine may not contain some indicators or
buttons. The actual shape shall prevail.
Page 18
Operating
Instructions
Auto
Heat
FRESH
FRESH(
Press 3s
)
FRESH(Press 3s)
Operation Instructions
COOL operation
· Press the "MODE" button until the "COOL" indicator
light comes on.
· Press the ADJUST buttons "+" or "-" to select your
desired room temperature. The temperature can be
set within a range of 17°C~30°C/62°F~88°F(or 86°F).
· Press the "FAN SPEED" button to choose the
fanspeed.
FRESH
FRESH(Press 3s)
Wireless indicator
light(only for the
unit with wireless
controll feature)
Either Timer
or Wireless
indicator light
Loading ...
Loading ...
Loading ...