Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor buz-
zes, but you can
not start the ma-
chine.
The supply volt-
age is low.
Make sure that
only the pres-
sure washer op-
erates on the cir-
cuit.
The system has
remaining pres-
sure.
1. Stop the ma-
chine.
2. Pull the gun
trigger on
spray wand
to release
pressure
3. Start the ma-
chine.
The voltage de-
creases across
extension cord.
Disconnect the
extension cord,
and connect the
machine directly
into the outlet.
You do not use
the machine for
a long time.
Speak to a per-
son of an ap-
proved service
center.
There is remain-
ing friction in
components.
You can hear a
hum.
1. Disconnect
the water
supply.
2. Turn the ma-
chine on for
2 or 3 sec-
onds.
3. Repeat the
above step
for several
times.
There is no wa-
ter.
The water supply
is off.
Turn the water
supply on.
The garden hose
is blocked.
Make sure that
the garden hose
is free from
blockage.
8 TECHNICAL DATA
Model No. G20
Rated Voltage 220-240 V, 50 Hz
Rated Pressure 8 MPa
Permissible Pressure 11 MPa
Power Rating 1400 W
Rated Water Flow 5.6 l/min
Maximum Water Flow 7.6 l/min
Maximum Water Inlet Pres-
sure
0.7 MPa
Maximum Water Inlet Tem-
perature
40 °C
Measured sound pressure
level
L
pA
= 80 dB(A), K
pA
= 3
dB(A)
Measured sound power lev-
el
L
wA
= 87.6 dB(A)
Guaranteed sound power
level
L
wA.d
= 91 dB(A)
Vibration < 2.5 m/s
2
, K = 1.5 m/s
2
Protection Degree IPX 5
Double-insulated con-
struction.
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner’s manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile
the technical file:
Name:
Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
8
English
EN
Loading ...
Loading ...
Loading ...