Loading ...
Loading ...
Loading ...
• Store the machine in a dry, isolated and frost-free
area.
7 TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor does
not start.
The power
switch is off.
Set the power
switch to the
“ON” ( | ) posi-
tion.
You do not plug
the power cord.
Connect the
power cord to
the power sup-
ply.
Electrical outlet
does not supply
sufficient power.
Try another elec-
trical outlet.
The circuit
breaker is trip-
ped.
Let it cool, and
start the ma-
chine again.
The power
switch is on, but
you do not pull
the gun trigger.
Pull the gun trig-
ger.
The machine
does not get
high pressure.
The diameter of
garden hose is
too small.
Replace with a
1” (25 mm) or
5/8” (16 mm)
garden hose.
The garden hose
is blocked.
Make sure that
the garden hose
is free from
blockage.
The water supply
is not sufficient.
Open the water
suppy fully.
You do not install
the nozzle onto
the spray wand.
Install the nozzle
onto the spray
wand.
The water intake
filter is blocked.
Remove the filter
and make it
clean in warm
water.
PROBLEM POSSIBLE
CAUSE
SOLUTION
The output pres-
sure varies high
and low.
The water supply
is not sufficient.
Open water sup-
py fully. Make
sure the garden
hose is free from
blockage.
The pump ab-
sorbs air.
1. Make sure
that the ho-
ses and fit-
tings have no
problem.
2. Turn the ma-
chine off.
3. Pull the gun
trigger until a
stable flow of
water comes
out through
the nozzle.
The water intake
filter is clogged.
Remove the filter
and clean it in
warm water.
The supply volt-
age is low.
Make sure that
only the pres-
sure washer op-
erates on the cir-
cuit.
The gun, hose or
nozzle are calci-
fied.
Operate distilled
vinegar through
detergent tank.
7
English
EN
Loading ...
Loading ...
Loading ...