Double Cylinder Electric Fryer
User’s Manual
TROUBLESHOOTING
SAFETY PRECAUTIONS
The voltage used by this machine must be the same as the rated voltage. The
machine should be connected to a 16A socket.
Users must not use extension cables with this machine.
There is a grounding bolt at the back of the machine. A copper core wire of no less
than 2.5mm² should be reliably connected to a grounding wire that complies with
safety regulations.
Before use, check all the wiring is tight, the operating voltage is correct, and the
outlet is reliably grounded. The shell of the machine should be attached properly
to ensure safe operation. Thank you for your cooperation and understanding as
this is a dangerous machine.
1.
2.
3.
4.
3
Problem
Cause
Solution
1. Connect the power cord
to the socket, but the green
indicator light is not on and
the machine is not working.
1. The machine is not
connected to power.
1. Fasten the power cord
and ensure the socket is
power on.
2. The fuse of the socket
connected by the user
is blown or the socket is
damaged.
2. Replace a fuse (＞16A)
for the socket, or replace a
suitable 16A socket..
1. The wiring of the
electric heating tube is
loose.
1. Tighten the connecting
screw of the electric
heating tube.
1. The thermostat does
not work.
1. Replace the thermostat.
1. The indicator light is
burned out.
1. Replace the indicator
light.
1. The temperature
limiter has already
worked for overheating
protection.
1. Reset the temperature
limiter. (Refer to Instruc-
tion No.10)
2. The electric heating
tube is burnt out.
2. Replace the heating
tube.
2. The red and green
indicator lights are on at the
same time, but the oil
temperature does not rise.
3. The red indicator light is
always on, and the oil
temperature rise cannot be
controlled.
4. The temperature is
controlled normally, but the
red indicator light is not on.
5. The green indicator light
is on, but the red indicator
light is not on and the
temperature does not rise
even if it is set to any
temperature.
Loading ...
Loading ...
Loading ...
