Loading ...
Loading ...
Loading ...
PXM-12MP Powered Monitor Input panel and DSP | en 19
Electro-Voice Installation manual 2019-10 | v01 | F.01U.363.983
LED - Enables and adjusts the functionality of the white LED located on the front grille.
– ON - The LED will always be illuminated while the loudspeaker POWER switch is set to
ON.
– OFF - The LED will remain off at all times.
– LIMIT - The LED will remain off during normal operation. Input signals above the
threshold of the internal peak limiter will momentarily illuminate the LED. This only
indicates that the limiter is active. Levels operating continuously beyond the limiter
threshold must be avoided.
DISPLAY - Submenu that contains parameters to adjust the LCD display.
– LCD DIM - When set to ON, the LCD display will automatically dim when the display is
idle for two minutes. (Default ON)
– BRIGHT - Sets the brightness of the LCD ranging from 1 to 10. (Default 5)
– CONTRAST - Adjusts the contrast between pixels on the LCD display from 1 to 10.
(Default 5)
STORE - This menu allows you to create up to five customized user settings.
To store customized user settings follow these steps:
4 From the DSP menu, scroll to STORE.
Push the MASTER VOLUME knob to select STORE.
1. Push the MASTER VOLUME knob to select 1.
2. Use the MASTER VOLUME knob to scroll through the characters.
3. Push the MASTER VOLUME knob to select the desired character.
4. Turn the MASTER VOLUME knob to move to the next character entry.
5. Use the MASTER VOLUME knob to scroll to SAVE.
6. Push the MASTER VOLUME knob to select SAVE.
7. Select EXIT to return to the home screen.
Repeat steps 3 through 8 to store additional customized user settings.
RECALL - This menu allows you retrieve up to five customized user settings.
To recall customized user settings follow these steps:
1. From the DSP menu, scroll to RECALL.
2. Push the MASTER VOL knob to select RECALL.
3. Push the MASTER VOL knob to select 1.
4. Select EXIT to return to the home screen.
RESET - This menu is used to reset the loudspeaker to original factory settings.
To reset the system to factory default settings follow these steps:
1. From the DSP menu, select RESET.
2. Select YES.
INFO - Displays the product name, firmware version, and copyright information.
EXIT - Returns the user to the HOME SCREEN.
Loading ...
Loading ...
Loading ...