Loading ...
Loading ...
Loading ...
6
How Your Dishwasher Cleans
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces.
The dishwasher fills with water covering the filer area. Water is then pumped through the multiple filter and spray arms.
Separated soil particles go down the drain as the water is pumped out and replaced with clean water.
The number of water fills will vary with the cycle being used.
Wash Cycle Selections
Cycle times are approximate and will vary with options water is necessary to activate dishwasher detergent and melt fatty
food soils.
An automatic sensor will check the incoming water temperature. If it’s not hot, a timer will be delayed for automatic water
heating in the main wash. Even when HI-TEMP WASH is selected, an even higher temperature will be guaranteed to handle
heavier soil loads.
NOTE
1. Your dishwasher has the top control panel. The door should be opened first if you want to operate the machine.
2. To start a cycle, the door must be closed within 4s after press Start/Cancel.
Features of Your New Dishwasher
Getting Started
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Filling the Detergent Dispenser).
3. Add rinse aid, if needed (See Filling Rinse Aid to Dispenser).
4. Select desired CYCLE (See Cycle Chart). The indicator
light beside the pad will glow when selected.
5. Select desired FUNCTIONS, the indicator light that
beside the pad will glow when selected.
6. To start, press Start/Cancel (See Start/Cancel) pad.
7. Close the door, then the machine will start to work.
Loading ...
Loading ...
Loading ...