Loading ...
Loading ...
Loading ...
8EN
Parts for Installation and
Connection
This parts list does not include all the package
contents.
Installation
•Mount the amplifier either inside the trunk (boot)
or under a seat.
•For your safety, choose a mounting location that
will not interfere with any driving operations.
•Do not install the amplifier near the heater, in
areas that get exposed to direct sunlight, or
subject to high temperature.
•Do not install the amplifier under a floor carpet
where the heat dissipation from the amplifier will
be considerably impaired.
•Avoid installing the amplifier in areas subject to
rain, moisture, dust and dirt.
Mounting the amplifier
1
Place the amplifier on your selected
mounting location, then mark the position
of the 4 screw holes on a mounting board
(not supplied).
2 Drill a 3 mm (
1
/8 in) pilot hole at each mark
and mount the amplifier onto the board
with the mounting screws .
The mounting screws are 20 mm (
13
/16 in)
long, so make sure that the mounting board is
thicker than 20 mm (
13
/16 in).
Installation and Connection
Mounting screw
(5 × 20 mm (
7
/32 ×
13
/16 in)) (4)
Hex key (2.5 mm (
3
/32 in)) (1)
Connection cable (1)
Installing the Amplifier
Loading ...
Loading ...
Loading ...