Loading ...
Loading ...
Loading ...
P90 Series Vertical Shaft Engines
70
11. If the results do not match the specifications:
11a. Turn off the engine.
11b. Disconnect the regulator/rectifier.
11c. Start the engine again and run it at full throttle.
12. Set the multimeter to read AC voltage.
13. Connect the black (-) lead of a digital multimeter to a
good ground on the engine.
14. Connect the red probe to one of the red wires from
the stator harness.
See Figure 6.40.
NOTE: The meter should read 8.5 to 10 Vac.
15. Move the red probe to the other red wire.
NOTE: The meter should read 8.5 to 10 Vac.
NOTE: If the meter shows the proper readings, the regulator/rectifier is bad and needs to be replaced.
NOTE: If the readings don’t match what is listed above, check the flywheel magnets. If the magnet are still
magnetic, replace the stator.
Figure 6.40
www.mymowerparts.com
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...