Loading ...
Loading ...
Loading ...
2
PLEASE READ THE FOLLOWING INFORMATION FOR PROPER
INSTALLATION AND OPTIMUM PERFORMANCE OF THE OVEN.
- The identication plate, with technical data, lot number and brand
name is visibly applied to the device. The label must not be removed.
- Before putting the unit into operation, it is mandatory to remove all
protective laser lms present.
- Never use steel sponges or sharp scrapers, its will damage the
surfaces. Use ordinary non-abrasive products, use, if necessary,
wood or plastic tools. Rinse thoroughly and dry with a soft cloth or
microber cloth.
- Do not use dishes or containers made of plastic material. The high
temperatures inside the oven could melt the plastic, damaging the
appliance.
- Use tools and utensils that are resistant to high temperatures.
- Position the oven on a at surface.
- Due to the temperature, the colour of the surfaces may vary in time.
- Do not paint or apply objects to the oven.
- Remove the protective lm before switching on, to facilitate the
separation, use warm air (for example, a hairdryer)
- The installation of the product must guarantee easy access for
cleaning.
- Where available, use the special stop-wheel supplied to lock the oven
once positioned.
- Never put inammable objects in the oven: they could be accidentally
GENERAL WARNINGS
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Additional copies of this manual at www.alfaforni.com
WARNING: improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or death. read
the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.
Loading ...
Loading ...
Loading ...