Loading ...
Loading ...
Loading ...
EN
10
refrigerator by rotating 1/4 turn (see
diagram).
4. The appliance should be located on
a smooth surface. The two front
feet can be adjusted as required.
To ensure that your appliance is
standing upright adjust the two
front feet, by turning clockwise or
anti-clockwise, until the product is in
firm contact with the floor. Correct
adjustment of feet avoids excessive
vibration and noise.
5. Refer to “Cleaning and Care” section
to prepare your appliance for use.
6. This appliance has been designed
to operate in ambient temperatures
between +10 and +32 degrees C
(50 and 90 degrees F). Therefore
if the appliance is installed in
an unheated / cold room (E.g.:
Conservatory /annex / shed / garage
etc.) then the appliance may not
operate and as a result the storage
time of food may be reduced.
7. A special receptacle is supplied to
store the mains plug during transit.
The receptacle is fixed at the back of
the cabinet, on the right hand side
of the compressor. (See diagram)
Gently remove the plug from the
receptacle.
8. Never pull the mains cord, you may
damage the appliance. In the case
of transportation, ensure you locate
the plug in the receptacle provided
to avoid transit damage.The space
in the room where the appliance is
installed must not be smaller than
10 cubic metres.
WARNING:
Do not locate extension sockets
or charging transformers/power
supplies or Lithium-Iron battery
operated products adjacent to the
compressor as they could overheat.
Loading ...
Loading ...
Loading ...