Loading ...
Loading ...
Loading ...
STEP 13 = ATTACH BAG BOTTOM
Insert the bag frame strap into the stitched sleeve at
the front edge of the bag bottom. See figure 11.
Fold the bag flaps around the lower hopper tubes and
attach to the bag bottom using the snaps. See figure
13.
BAG FRAME STRAP
STITCHED
SLEEVE
FIGURE 11
SNAP
FIGURE 13
Assemble the bag frame strap to the holes in the
lower hopper tubes using two clevis pins (O) and hair
cotter pins (M). See figure 12.
STEP 14 =ASSEMBLE HOPPER CLAMPS
Assemble two hopper mount clamps (S) over the hole
in the middle of each upper hopper tube using two
carriage bolts (E) and two nylock nuts (F). Tighten
only finger tight. See figure 14.
BAG FRAME STRAP
CLEVIS PIN (O
FIGURE 12
5/16" x 3/4" 5/16" NYLOCK
CARRIAGE NUT (F)
BOLT (E)
HOPPER
MOUNT _
CLAMP (S)
UPPER
HOPPER
TUBE
FIGURE 14
Loading ...
Loading ...
Loading ...