Loading ...
Loading ...
Loading ...
25
Useful features
Caution
If the unit falls, it may be damaged or cause injury. Observe the following precautions when
mounting the unit on a wall.
– Do not mount the unit on a wall covered with a material such as mortar or veneer that peels
easily.
– Do not use a nail or double-sided tape to mount the unit on a wall.
– Take all necessary precautions to prevent the unit from falling. Such measures may include the
use of a cable or wire anchor.
Use the wall mount screw hole on the rear panel to mount the unit on a common wall
mount hanger bracket (sold separately).
Caution
• Be sure to use a wall mount hanger bracket that is compatible with this unit to prevent the unit
from falling or overturning.
• Use a wall mount hanger bracket with a load capacity of 4.5 kg (10 lbs) or more.
• Follow mounting instructions provided with the wall mount hanger bracket and mount the
unit correctly.
• When a common mount bracket (sold separately) is used, be sure to attach a cable or wire
anchor to the unit and the mount bracket.
Note
Use a wall mount hanger bracket that supports a unified-thread screw like those used on camera
tripod heads. Refer to the chart below and prepare a screw that conforms to the specifications
indicated.
Using the wall mount screw hole
Mounting screw specifications
1/4-20 UNC
Wall mount screw hole specifications
Diameter 6.35 mm (1/4") Diameter 6.35 mm (1/4")
Threads/inch 20 Depth 8 mm (3/8")
75 mm (3")
150 mm (5-7/8")
186 mm (7-3/8")
52 mm (2")
5 mm (1/4") or more
8 mm
(3/8")
Unit weight
2.2 kg (4.8 lbs)
Insert the screw at least 5 mm
(1/4").
Wall mount
screw hole
Loading ...
Loading ...
Loading ...