Loading ...
Loading ...
Loading ...
27
Spillovers on
the touch
controls
1. Switch off the power
supply.
2. Soak up the spill
3. Wipe the touch control
area with a clean
damp sponge or cloth.
4. Wipe the area
completely dry with a
paper towel.
5. Switch on the power
supply to the cooktop.
• The cooktop may beep and turn
itself off, and the touch
controls may not function while
there is liquid on them. Make
sure you wipe the touch control
area dry before turning the
cooktop back on.
Maintenance of the Cooktop
If you find something goes wrong for your cooktop, before contact the
service or where you purchased it, please check whether below:
1. There is no power to the appliance:
- Check whether there is a power cut of your department;
- Check whether the appliance be connected to electricity properly;
- Has the timer setting elapsed;
- Whether it reaches the longest cooking time setting and auto shut off;
- Whether there is liquid boiling over touch control panel and overflow protection
devices auto shut off;
2. The touch control panel buttons can’t be active:
- Whether it’s under “Child Lock”, which there is “Lo” shows in timer displayer;
- Whether liquid/wet cloth over touch control panel active overflow protection;
3. After cooking there is “H” shows on display:
- This is normal. The cooktop is with Residual Heat Warning safety features. It will
remain on until the surface is cool enough for touch.
4. After turn off, the fan of induction cooktop remains working for a while:
-This is normal, this is to help appliances completely cool down.
5. Some pans make crackling or clicking noises during use of induction cooktop:
-This is normal, it’s the sound of induction coils during working, and for different
construction of your cookware, the clicking might be slightly different.
6. The glass is being scratched:
-Check whether you use unsuitable cookware, like rough-edged cookware.
-Check whether unsuitable, abrasive scourer or cleaning products being used.
7. The heating element of ceramic cooktop turns on and off alternately when
working:
-This is normal and natural feature for ceramic cooktop. Programmer of ceramic
cooktop, together with the thermostat or thermocouple in heating element, could
control the cooktop work at set power level and avoid overheat by heating
element work on/off alternately.
Loading ...