Loading ...
Loading ...
Loading ...
21
To active Stop & Go function, you can press the Stop & Go function button
once. Then all programmer setting be hold on and cooktop stop heating, all heat
setting indicators show “P”.
2. Inactive Stop & Go function
To cancel Stop & Go function, you can press the Stop & Go function again,
after come back. Then all programmer setting will return to what they were,
Stop & Go indicator “P” disappear from all indicators.
When Stop & Go function active, all control buttons are disable except
the ON/OFF and Stop & Go button.
Note: The cooktop will auto turn off, if Stop & Go function last more than 10
minutes.
Using the Timer
When the cooktop is turned on, you can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn either or more than one cooking zones off.
• You can set the minute minder/timer for up to 99 minutes.
Timer overview
Using the Timer as a Minute Minder
If you have not selected any cooking zones
1.Touch the timer control button , the number in timer
indicator flashing.
2. Then adjust Minute Minder setting follows below:
• Set heat setting by touching the or button.
• If press and hold either of the two buttons, the value
will adjust down or up rapidly in circle.
Note: When the timer indicator flashing, touch timer control
button another time, can quick confirm the timer setting.
Note: By continuous touch the timer control button, it works
Minute display
shows the number
of minutes
Timer control
Loading ...
Loading ...
Loading ...