Tripp Lite SMART1500RM2U Owner's Manual

Loading ...

Mounting (Rack)

Mountyourequipmentineithera2-postor4-postrackorrackenclosure.Theusermustdetermine

thefitnessofhardwareandproceduresbeforemounting.Ifhardwareandproceduresarenotsuitable

for your application, contact the manufacturer of your rack or rack enclosure. The procedures

described in this manual are for common rack and rack enclosure types and may not be appropriate

for all applications.

Note: The illustrations may differ from your model.

4-Post Mounting

The included plastic pegs

will temporarily

support the empty rackmount shelves

while you install the permanent mounting

hardware.Insertapegnearthecenterofthe

front and rear bracket of each shelf as

shown. (Each front bracket has 6 holes and

each rear bracket has 3 holes.) The pegs will

snap into place.

Afterinstallingthepegs,expandeachshelf

to match the depth of your rack rails. The

pegswillfitthroughthesquareholesinthe

rack rails to support the shelves. Refer to the

rack unit labels to confirm that the shelves

are level in all directions. Note: The support

ledge of each shelf must face inward.

Secure the shelves

to the mounting rails

permanently using the included screws and

cup washers

as shown. Place the cup

washer between the screw and the rack so

that the screw enters the wider opening of

the cup washer first.

Place4screwstotalatthefrontand4

screws total at the back.

Tighten all screws before proceeding.

WARNING: Do not attempt to install your

equipment until you have inserted and

tightened the required screws. The

plastic pegs will not support the weight

of your equipment.

Attachyourequipment’smountingbracketsto

the forward mounting holes of the cabinet using

thehardwareincludedwithyourequipment.

The mounting bracket “ears” should face

forward.(Someequipmentmayhave

pre-installed or integral mounting brackets.)

Withtheaidofanassistant(ifnecessary),

liftyourequipmentandslideitintothe

shelves.Attachtheequipmentmounting

brackets to the forward mounting rails with

user-supplied screws and washers

Tighten all screws securely.

201205186-93-3148.indb 4 6/19/2012 1:15:01 PM

Loading ...

Tripp Lite SMART1500RM2U 1500VA Smart UPS Back Up, Sine Wave, 1350W Line-Interactive, 2U Rackmount

Owner's Manual - Page 4