Tripp Lite SMART1500RM2U Owner's Manual

Loading ...

Basic Operation continued

Control Menu Options

Enable/Disable Alarm

Tap the

buttonrepeatedlytoadvancetotheLCDdisplayfeaturingtheicon. Press the

buttontoselectONorOFFalarmmodesettings.Thelastoptiondisplayedbeforenavigatingaway

from this menu option will be the selected setting.

Note: Disabling the alarm via this control menu option will silence the alarm under all conditions, including low

battery conditions.

LCD Brightness

Tap the

buttonrepeatedlytoadvancetotheLCDBrightnessdisplaymarked“LCD.”Pressthe

buttontoselectMediumBacklight(default),HighBacklightorDimBacklight.Thelastoption

displayed before navigating away from this menu option will be the selected setting.

Note: The default brightness is set at medium. Any time a button is pressed, the LCD will engage the high

brightness setting. After 2 minutes of inactivity, the backlight will revert to the selected setting until a button is

pressed.

Self-test

Tap the

buttonrepeatedlytoadvancetotheTESTBATTdisplay.Pressthe button to initiate

thetest.Thetestwilllastapproximately10secondsastheUPSswitchestobatterytotestthe

capacitywithaload.Uponcompletionofthetest,thedisplaywillindicatePASorBAD(passorbad)

for20seconds,andthenreturntothehomescreen.Connectedequipmentcanremainonduring

thetest.DonotunplugyourUPStotestit;thiswillremovesafeelectricalgrounding.

Note: If the self-test result is BAD, it may be due to the batteries not being fully charged for 24 hours. Fully charge

the batteries and repeat the self-test. Please refer to the note under Step 3 on page 6.

Scroll Control

Thissettingisnormallysetto“OFF.”Settingitto“ON”allowstheusertoselecttheoptionto

automaticallyscrolleachoperatingconditionoftheUPS(suchasInputVoltage,OutputVoltageand

Runtime) automatically.

Tap the button repeatedly to advance to the Scroll display as shown above.

Press the

buttontoadvancetothenextavailableoption.Thelastoptiondisplayed,before

navigating away from this menu option, will be the selected setting.

Note:

1. Each condition is displayed in 2-second intervals.

2. If a button is pressed while Scroll Mode is enabled, the scroll function will pause for 10 seconds to allow the

user to manually make menu selections.

201205186-93-3148.indb 13 6/19/2012 1:15:09 PM

Loading ...

Tripp Lite SMART1500RM2U 1500VA Smart UPS Back Up, Sine Wave, 1350W Line-Interactive, 2U Rackmount