Loading ...
Loading ...
Loading ...
If the present time is between noon
and midnight, be sure PM shows.
++. ...i_4
1
PRESENT TiME |
If the present time is between mid ........ ,._. _.;..,._-,
night and noon, be sure AM shows,, paEsE.TTime
NOTE: Each press of the UP/DOWN buttons changes
the time by 1 minute+ Holding the buttons in changes
the time 32 minutes each second.
ba
SET WATER HARDNESS NUMBER:
[] Press the SELECT button once to display 15
(flashing) and HARDNESS.
The grains per gallon (gpg) ]
hardness of your water supply !;_,
!
is on your water analysis report .ARO.ESS
(see page 5), or call and ask
your local water department
m Press the[_UP/DOWN(_buttons to set your
water hardness number in the display. The DOWN
button moves the display down to 1. The UP button
moves the display up to 95,
NOTE: Each press of the UP/DOWN button changes
the display by 1 between 1 and 25, Between 25 and
95, the display changes 5 at a time .....25, 30, 35 etc+
Holding the UP/DOWN button in changes the display
twice each secondĀ°
Cm
SET RECHARGE (REGENERATION) TIME:
[] Press the SELECT button once to display 2:00
AM (flashing) and RE+ [
CHARGE TIME+ " 3.:"'_-"%r._l
[
t+'cl_ plJ, +- _ '
I
At the 2:00 AM RECHARGE "_CHARa%+MEI
TIME setting, the softener begins regeneration
(see pages 18 and 19) at 2:00 AM, ending no
later that 4:00 AM+ This is a good time in most
households because water is not being used
(see AUTOMATIC BYPASS, page 20)+
If a different RECHARGE TIME setting would be
better for your household, do the following
[] Press the[_UP/DOWN(_buttons to set the
desired RECHARGE starting hour_ Be sure to ob-
serve the AM-PM as you did when setting the present
time of day,
NOTE: Each press of the UP/DOWN buttons changes
the display 1 hour. Holding the buttons in changes the
display twice each second+
_. PRESS THE SELECT BUTTON ONCE AGAIN,
to return the present time (steady) of day
and RECHARGE TONIGHT in the
display,.
,==]
RECHARGE TONIGHT I
a
Press the ON/OFF-HOLD button and hold for3
seconds to start a rechargeĀ° This first recharge
does several things,
- It draws the bleach (step 1) into and through
the softener to sanitize it
-It fills the salt tank to the water-level needed.
- It gets all the air out of the resin tank,
-it makes the resin bed (see page 18) ready for
service,,
16
Loading ...
Loading ...
Loading ...