Loading ...
Loading ...
Loading ...
6
1. After everything is connected, close both Torch Handle Valves, turning clockwise. Close Regulators,
turning knobs counter-clockwise until loose.
2. Open the cylinder valves turning counter-clockwise only until the gas starts owing. WARNING! Only
open Acetylene Cylinder Valve 1/4 to 1/2 turn.
3. Open the Oxygen cylinder valve completely, turning it counter-clockwise.
4. Adjust the Oxygen Regulator to deliver 20 PSI. Adjust the Acetylene Regulator to deliver 10 PSI.
DO NOT EXCEED 15 PSI ACETYLENE PRESSURE.
5. Check all connections for leaks using soapy water: • If leaks are found, tighten connections. • If a leak
persists, discontinue use and call gas supplier. • If no leaks are found with this test, move on to the Gauge
Monitoring test.
DANGER! To prevent serious injury and/or death, DO NOT tighten or adjust
any connection between the cylinder and cylinder valve, or force the cylinder
valve. If the cylinder valve is leaking, move the cylinder outside and notify
your gas supplier immediately.
CHECKING FOR LEAKS
Loading ...
Loading ...
Loading ...