Loading ...
Loading ...
Loading ...
4
PRODUCT SPECIFICATIONS
ASSEMBLY AND OPERATING PROCEDURES
NOTE: The following instructions are for acetylene gas use only. DO NOT use other fuel gases.
1. While standing on one side, “crack” each cylinder valve. “Cracking” is to
quickly open and close the valve, allowing gas to escape and clearing the
valve of any foreign material. If any oil or grease is found do not use the
cylinder and contact the supplier immediately.
2. Attach the GREEN oxygen regulator (Parts A1-A20E)) to the oxygen cylinder. Then, attach the RED
acetylene regulator (parts 1-19) to the acetylene cylinder. Make sure they are tightened in the correct
directions (normally clockwise for oxygen and counter-clockwise for acetylene) DO NOT USE THREAD
SEALING TAPE.
ASSEMBLY AND OPERATION
Loading ...
Loading ...
Loading ...