Loading ...
Loading ...
Loading ...
03
Ensure the PV input voltage does not exceed 25 Vdc to prevent permanent damage. Use
the Open Circuit Voltage (Voc) at the lowest temperature to make sure the voltage does
not exceed this value when connecting panels together.
Danger of fatal electric shock!
If you are working on electrical systems,ensure that there is somebody close at hand who
can help you in emergencies.
NEVER connect the solar panel to the charger without a service battery connection. The
Battery must be connected first.
Make sure that the cables has a suffcient cross-section.
Use ductwork or cable ducts if it is necessary to lay cables through metal panels or
other panels with sharp edges.
Lay the cables so that they cannot be damaged by the doors or the bonnet.
Crushed cables can lead to serious injury.
Lay the cables so that they cannot be tripped over or damaged.
Do not lay the AC cable and DC cable in the same conduit (empty pipe).
Do not lay the cables so that they are loose or heavily kinked.
Firmly secure the cables,contact with each other.
Do not pull on the cables
WARNING
Safety when connecting the product electronically
For installation on boats:
If electrial devices are incorrectly installed on boats，this can lead to corrosion damage
on the boat. Have the product installed by a qualified (boat) electrician.
DANGER
Charger Safety
NOTICE
CAUTION
NOTICE
Loading ...
Loading ...
Loading ...