Loading ...
Loading ...
Loading ...
10
Location Considerations
The battery charger must be installed in a place that is protected from moisture.
The battery charger may not be installed in a dusty environment.
The device must be installed on a level and sufficiently sturdy surface.
The place of installation must be well ventilated. A ventilation system must be available for
installations in small, enclosed spaces. The minimum clearance around the battery charger
must be at least 5cm.
The battery charger can be installed horizontally as well as vertically.
The battery charger may not be installed in the presence of flammable materials.
Never mount the product in areas where there is a risk of gas or dust explosion.
DANGER
Set up the product in a dry location protected from splashing water.
Do not expose the product to any heat source (such as direct sunlight or heating).
Avoid additional heating of the product.
NOTICE
Mount the Battery Charger
Ensure a secure stand!
The product must be set up and fastened in such a way that it cannot tip over or fall down.
CAUTION
Installation
When selecting a location for the DCDC, make sure that the unit is as close as possible to the
battery you will be charging (auxiliary battery). The charger may be mounted on the cabin of
tthe vehicle, along a chassis rail, the inner guard of a vehicle, behind the grille or headlight or
even on the side of the radiator. However, you want to make sure that the area is not
susceptible to moisture or other substances as well as potentially high temperatures. The
DCDC would operate best if there is some air flow.
Loading ...
Loading ...
Loading ...