Loading ...
Loading ...
Loading ...
32
4.6 LCD Panel Abbreviations
4. Operation
Abbreviation Display content Meaning
ENA
Enable
DIS
Disable
ATO
Auto
BAT
Battery
NCF
Normal Mode (not CVCF
Mode)
CF
CVCF Mode
SUB
Subtract
ADD
Add
ON
On
OFF
Off
FBD
Not allowed
OPN
Allow
Abbreviation Display content Meaning
RES
Reserved
N.L
Neutral line loss
CHE
Check
OP.V
Output voltage
PAR
Parallel, 001 means the
first UPS
RN
The first phase
SN
The second phase
TN
The third phase
RS
The first line
ST
The second line
TR
The third line
HS.H
Hot standby
4.7 Setup Menu
Press and hold the Test/Up and Mute/Down buttons simultaneously for longer than one second to enter/exit the Setup Menu.
There are three parameters to set up the UPS. Refer to the illustration below.
Parameter 1 is for program alternatives. Refer to below tables for the programs to set up.
Parameter 2 and Parameter 3 are the setting options or values for each program.
The display will time out after 10 minutes of inactivity. This feature is always enabled.
Note: Use the “Up” or “Down” button to change the programs or parameters.
Parameter 1
Parameter 2 Parameter 3
Loading ...
Loading ...
Loading ...