Loading ...
Loading ...
Loading ...
I=.llJ_[e]jj[e] _F_,IIIIIB]:[.."le]-'|I"..]IIIII[e]_
FOREWORD
The Porter-Cable TIGER SAW®is designed for cutting wood up to 12" thick,
metal up to 3/4" thick and various other materials, such as plastics, fiberglass,
hard rubber,etc.
SELECTING THE BLADE
For best performance, longer blade life, and smoother cut, select the proper
blade for the job. A wide assortment of Porter-Cable blades is listed in the
back of this manual.
When cutting metal alwaysselect a blade which willallowat least three teeth
to be engaged in the thicknessof material,
INSTALLING THE BLADE
MODELS 735 and 737 with Quick-Change" Blade Clamp
1. The reciprocating shaft must be fully extended to permit access to the
Quick-Change" blade releasecollar(A)Fig. 1. If necessary,gentlysqueeze the
trigger switch to move the reciprocatingshaft to its outermost position (as
shown in Fig. 1).
Disconnectsaw from power source before installing
or removingblades.
2. Pivot the guide shoe (B) Fig. 1, forward to improve access to the blade
clamp.
3. To open the blade clamp: rotate and hold the blade release collar(A)Fig.
2, counterclockwise(asviewed from the frontof the saw).
Fig. 1 Fig. 2
4. Insert the blade into the clamp
untilit bottoms.Allow the releasecollar
to rotate clockwise to lock the blade in
place, (A) Fig. 3.
5. To remove blade: repeat steps 1
through 3, and pull blade from blade
clamp (while the release collar is being
held in the open position).
NOTES: If the blade clamp
collar resists rotation to
remove a blade,
7
Fig. 3
Loading ...
Loading ...
Loading ...