Loading ...
Loading ...
Loading ...
11
1
7
3 4 5 62
EMPTYING THE COLLECTION TANK
MAINTENANCE
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the power head from the collection tank (Fig. 3). Place power
head on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
5. Clean or replace the lters.
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
7. Place power head back on collection tank and secure latches.
IMPORTANT! Clean or change the cartridge lter regularly for best performance. ALWAYS USE
THE CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge
lter, the motor will burn out and the warranty will be voided. Always keep spare cartridge lters on
hand.
NOTICE! The lters included are made of high quality materials designed to stop small dust
particles. The cartridge lter should be used for dry pick-up only. A dry cartridge lter is necessary
to pick up dust. If the cartridge lter is wet, it will clog quickly and be difcult to clean. Handle the
lter carefully when removing it for cleaning or replacing. Check the lters for tears or small holes.
A small hole can let dust pass through and out of the lter. Do not use a lter with holes or tears in
it; replace it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The cord should
be wrapped and hung on the hook of the handle. The hose and accessories should be stored as
illustrated so they can be readily available when needed (Fig. 5 - 7). The vacuum should be stored
indoors when not using.
REPAIRS
Repairs for this wet/dry vacuum should be performed only by qualied service personnel using
only identical replacement parts.
Loading ...
Loading ...
Loading ...