GE - General Electric PDWT505T30WW GE dishwasher

User Manual - Page 9

For PDWT505T30WW.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
6EAppliances.com
E"j| Start (continued)
D
Top-Control Dishwashers
After selecting the cgcle and desired enhancements, touch the START/RESETpod to reodg the
dishwasher to begin the cgcle. Closethe door to start the cgcle or begin the DELAVSTARTcountdown.
When the cgcle starts, the water fill begins and opproximotelg 60 seconds later the wash action begins.
The dishwasher will olwogs displog gour lost selection and enhancements. If gou don't wont to change
the settings, simplg touch the START/RESETpod to reodg the dishwasher and closethe door to begin
the cgcle.
ALL MODELS:If o power failure occurs NORMALand HEATEDDRYwill outomoticollg be programmed.
Make ong new selections and touch the START/RESETpod to begin the new cgcle.
When the door is opened, the indicator lights will turn off if the START/RESETpodis not selected within
5 minutes. To activate the displog, open and close the door or touch ong pod.
Clean
Front-Control Dishwasher
The CLEANlight will illuminate and o double beep will sound when o wash cgcle is complete. On some
models, the CLEANlight will turn off when the door is opened. On other models,the CLEANlight will
remain on until the door is opened and then relotched or until ong kegpod is pressedwhile the door
is latched shut.
Top-Control Dishwasher
The CLEANlight will illuminate and a double beep will sound when a wash cgcle is complete. The CLEAN
light will remain on until the door is opened and then relatched or until any keg is pressed.
ALL MODELS:To turn off the audible end-of-cycle signal (orre-activate it if it was previously turned off),
pressthe HEATEDDRYpad 5 times within 5 seconds.A triple beep will sound to indicate the end-of-cycle
beep option has been toggled.
Flashing display lights.
Status Indicator Lights
START/RESET
What It Means
Cycle has been interrupted by pressingthe START/RESETpad, or there
has been a power failure. Light will stop flashing after the dishwasher
automatically drains out the water. The dishwasher will restart with NORMAL
and HEATEDDRYif the interruption was the result of a power failure.
Recommended dishwasher products.
GErecommends the following products for use in its
dishwashers:
Foryour manual detergent dispenser,Cascade®
powder, liquid or gel automatic dishwasher
detergents are approved.
Forgour SmartDispenseTM Detergent Dispenser,use
onlg the recommended liquid automatic detergents
listed on page 12of this manual.
Cascade Crystal Clear ®rinse agents to remove
spots and prevent new film buildup on gour dishes,
glasses,flatware, cookware and plastic. Using rinse
agent also improves drg performance.
Cerama Bryte ®StainlessSteelAppliance Cleaner
to clean the exterior stainlesssteel panel of GEand
ProfileTM dishwashers (for stainlesssteel exterior
models onlg).
Loading ...
Loading ...
Loading ...