Loading ...
Loading ...
Loading ...
About the dishwasher control panel.
D Enhancements
The light above the selected pad will be ON to indicate which ENHANCEMENThas been selected.
DELAYHOURS
Youcan delay the start of a wash cycle for up to 24 hours (dependingon model).
Pressthe DELAVSTARTpad to choose the number of hours you want to delay the start
of the cycle; then pressSTART/RESET.
Front-Control Dishwashers: The machine will count down and start automatically
at the correct time.
TEMP BOOST/
ADDED HEAT/
EXTRA HOT WASH
STEAM
(onsome models)
HEATED DRY
LOCK
RESET
ir.l
Top-Control Dishwashers: After closing the door,the machine will count down
and automatically start at the correct time.
NOTE:Tocancel the DELAVSTARTselection before the cycle begins,repeatedly press
the DELAVSTARTpad until the display is blank.
When selected,the cycle will run longer with heating element on to improve both wash
and dry performance.
NOTE:Cannot be selected with RINSEANDHOLD cycle.
For use with heavily soiled and/or dried-on, baked-on soils.Thisoption IvlUSTbe
selected PRIORto starting the cycle. The STEAMoption adds 26 minutes to the
cycle time.
NOTE:Cannot be selected with RINSEANDHOLDcycle.
When HEATEDDRY is off, disheswill air dry. Top-control models have a fan that assists
the drying process.The fan will run up to 4 hours affer the CLEANlight illuminates. If
desired,pressing any keypad will turn off the fan.
Light Off: Shuts off the drying heat option. Disheswill air dry naturally (front-control
dishwashers)or fan dry (top-control dishwashers)to save energy.
Light On: Turnsthe heater on for faster drying. Thiswill extend the total cycle time
between 8 and 58 minutes depending on the cycle selected.Ontop-control models,
a fan will continue to run up to 2 hours after the CLEANlight illuminates to assistthe
drying process.If desired,pressing any keypad will turn off the fan.
NOTE:Cannot be selected with RINSEAND HOLD cycle.
Youcan lockthe controls to prevent any selections from being made. Or you can lock
the controls after you have started a cycle.
Children cannot accidentally start dishwasher bg touching pads with this option
selected.
To unlock the dishwasher controls, pressand hold the HEATEDDRYpad for 3 seconds.
The light above the lock pad will turn off. To lock the dishwasher,pressand hold the
HEATEDDRYpad for 3 seconds.The light above the LOCI(pad will turn on.
To change a cycle offer washing starts...
Front-Control Dishwashers: Touchthe START/RESETpad to cancelthe cycle.
TheSTART/RESETlightwill flash while the water is pumped out if needed.Thistokes
approximately 2 minutes.
Top-Control Dishwashers: Open the door slowly to prevent splash-out.
Touchthe START/RESETpad to cancel the cycle. Ifthe START/RESETlight is flashing,
close the door until the water pumps out (thistokes approximately 2 minutes)
and the light stops flashing.
When the light stops flashing, the dishwasher can be reprogrammed and restarted.
Start
Front-Control Dishwashers
Closeand latch the dishwasher door and select the cycle and desired enhancements. Touch the
START/RESETpad one time to begin the cycle. Water fill begins immediately, and approximately
60 seconds later the wash action begins.
When the dishwasher door is fully closed and latched, the control panel lights will display the last settings
you selected.If you don't want to change any of the settings, simply touch the START/RESETpad to
begin the cycle.
If the door is closed,the indicator lightswill turn off if the START/RESETpad is not selectedwithin 5 minutes.
To activate the display, open and closethe door or pressany pad.
Loading ...
Loading ...
Loading ...