Loading ...
Loading ...
Loading ...
IT6302 user manual
USER MANUAL
18
to the previous menu.When the item keeps filickering indicates it is selected currently.
Note: Both pressing Enter and down arrow key can display the next menu. But the difference
between the two methods is as follows: press enter key can save the current setup, while
press up/down key will not change the previous setup.
3.5 Panel Operation
3.5.1 Channel Operation
When
V-setV-set
or
I-setI-set
button is lit, press (Local) key can switch between the three
channels.
3.5.2 OUT ON/OFF
Pressing
On/Off
button toggles the output state of all 3 channes of the power supply.If the
output state is ON,press it,to turn the output state to OFF.While the output state is
OFF,press
On/Off
and the power supply output will turn ON.
To control channels individually,press (Shift)+
1
, (Shift)+
2
, (Shift)+
3
corresponding to each channel. (Shift)+
1
controls the output state of the first channel,
(Shift)+
2
controls the output state of the second channel, (Shift)+
3
controls the
output state of the third channel.
When the power supply is in remote mode,you can set the output state by sending SCPI
command(OUTPut: ON | OFF).The output state operation does not affect any other
parameter.
Note: The
On/Off
key controls the output state of all 3 channels simultaneously.
If you want to control the output state of individual channels,use the number keys 1-3
with shift button.
3.5.3 Set Voltage
Solution 1: press (Local) to select channel, press
V-setV-set
then enter a numerical value
followed by
Enter
.
Solution 2: Press
V-setV-set
,then press to move the cursor position and adjust the
voltage value using the knob. Press
Esc
or
Enter
to exit.
Loading ...
Loading ...
Loading ...