Loading ...
Loading ...
Loading ...
SAFETY 343
Regular And Mega Cab Trucks:
In the regular cab truck, the top tether
anchorages are located behind the center and
right passenger seats. In the mega cab truck,
the top tether anchorages are located behind
each rear seating position. There is a plastic cover over
each anchorage. To attach the tether strap of the child
restraint:
1. Place the child restraint on the seat and adjust the
tether strap so that it will reach over the seat back,
under the head restraint and to the tether anchor
directly behind the seat.
Regular Cab Tether Anchorages
2. Route the tether strap to provide the most direct path
between the anchorage and the child seat. The tether
strap should go between the head restraint posts
underneath the head restraint. You may need to
adjust the head restraint to the upward position to
pass the tether strap underneath the head restraint
and between its posts.
3. Lift the cover (if so equipped), and attach the hook to
the square opening in the sheet metal. Tighten the
tether strap according to the child seat
manufacturer’s instructions.
Crew Cab Trucks:
The top tether anchorages in this vehicle are
tether strap loops located between the rear
glass and the back of the rear seat. There is a
tether strap loop located behind each seating
position. Follow the steps below to attach the tether strap
of the child restraint.
Right Or Left Outboard Seats:
1. Raise the head restraint and reach between the rear
seat and rear glass to access the tether strap loop.
Head Restraint In Raised Position
Tether Strap Loop With Center Head Restraint
In Raised Position
1 — Tether Anchor
2 — Tether Strap Hook
3 — Tether Strap To Child Restraint
WARNING!
Never place a rear-facing child restraint in front of an air
bag. A deploying Passenger Front Air Bag can cause
death or serious injury to a child 12 years or younger,
including a child in a rear-facing child restraint.
6
23_DJD2_OM_EN_USC_t.book Page 343
Loading ...
Loading ...
Loading ...