Loading ...
Loading ...
Loading ...
2.Tightenthecompressionnut(B)ontothe
compressionfitting.
Donotover-tightenthecompressionnut(B).
3oTurnthewateronandcheckforanyleakage.
Ifyoufindwaterdropsorleakageinthe
connectionareas,turnoffthemainwater
supply.Checktheconnectionsand,if
necessary,tighten.
4. Flush1gallonofwaterthroughthefilter
beforedrinkingorusingthewaterfromthe
refrigerator.(Flushapproximately6minutes.)
Toflush,pressalargeglassorcupagainstthe
waterdispenserlever.Filltheglass,emptyit
intothekitchensinkafteritisfilled,andthen
repeat.
5.Afteryouturnontherefrigerator,lettheice
makermakeicefor1to2days.Overthat
periodoftime,throwoutthefirst1or2
bucketsoficethefreezermakestoensureall
impuritieshavebeenremovedfromthewater
line.
Onlyconnectthewaterlinetoadrinkable
watersource.
Ifyouhavetorepairordisassemblethewaterline,
cutoff1/4"oftheplastictubingtomakesureyou
getasnug,leak-freeconnection.
[_ oucantestthewaterlinequicklyusinga
papercup.Undernormalconditions,the
waterdispensercanfilla5.75oz.(170cc)
cupinabout10seconds.
COMPLETING THE SET UP
Now that you have your new refrigerator installed
in place, you are ready to set up and enjoy the
features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
1.
Make sure your refrigerator is in an appropriate
location with reasonable clearance between it
and the wall. Refer to installation instructions in
this manual.
2. Once the refrigerator is plugged in, make sure
the interior light comes on when you open the
doors.
3o Set the Temperature control to the coldest
temperature and wait for an hour. The freezer
will get slightly chilled and the motor will run
smoothly. Reset the refrigerator and freezer to
the temperatures you want.
4. After you plug the refrigerator in, it will
take a few hours to reach the appropriate
temperature. You can store food and drinks
in the refrigerator after the temperature is
sufficiently cool.
If condensation or water drops appear
on both sides of the fridge door's central
part, turn the Energy Saver mode off after
removing the condensation. (See the
explanation of the Energy Saver button in
"Using the Control Panel" on page 18.)
Engl sh - 17
Loading ...
Loading ...
Loading ...