Loading ...
Loading ...
Loading ...
23
20. DISPLAYED MESSAGES
DISPLAYED MESSAGE MEANING SOLUTION
Please ll the tank with fresh
water up to MAX level. Be sure to
ll above Level 1
Insucient water in the tank
(A22)
. Extract the tank, ll with fresh water to above
Level 1 and put back in the appliance.
I don’t have enough water for
your beverage. Please ll the tank
with fresh water up to MAX level.
Be sure to ll above Level 1
Please insert the water tank
The tank
(A22)
is not correctly in place. Insert the tank correctly and press as far as it
will go.
Fill the tank with fresh water.
Please empty drip tray and
grounds container
The amount of water in the tank is not
enough to make the beverage and the
message to empty the grounds container
will be displayed shortly.
The appliance asks for both operations to be
performed so that no further intervention will
be necessary and more beverages can be made
one after the other without interruption.
Please insert the brewing unit
The brewing unit (A6) has not been re-
placed after cleaning.
Insert the brewing unit as described in section
“15.8 Cleaning the brewing unit”
Please empty grounds container
The grounds container (A10) is full. Clean as described in section “15.3 Cleaning
the coee grounds container”
Please insert grounds container
and drip tray
The grounds container (A10) and/or drip
tray (A15) is not correctly in place or is
missing.
Insert the drip tray complete with grounds
container and press as far as it will go.
Please add your preferred
pre-ground coee. - max: one
measure!
Preparation with pre-ground coee has
been selected.
Make sure the funnel (A4) is not blocked, then
add one level measure (D2) of pre-ground
coee, press “Next” on the display and follow
the instructions in section “8.4 Making coee
using pre-ground coee”.
Fill the beans container and press
“OK” to resume brewing
The coee beans have run out. Fill the beans container (A2) and press “OK” to
resume brewing
Please insert the water spout The spout (D6) is not correctly in place or
is missing.
Insert the spout and push as far as it will go
(g. 5). The appliance emits a beep (if the
beep function is enabled).
Please insert the cold/hot milk
carafe
The milk carafe (E) or (F) is not inserted
correctly or is missing.
Insert the milk carafe and push as far as it will
go. The machine emits a beep (if the beep
function is enabled).
Just doing a little cleaning. I’ll be
back in a few seconds
The appliance has detected impurities in its
internal circuits.
Wait for the appliance to be ready again and
reselect the required beverage. Contact cus-
tomer services if the problem persists.
→
Loading ...
Loading ...
Loading ...