Loading ...
Loading ...
Loading ...
Quick Start
EN
HT360 series user manual Copyright©Qingdao Hantek Electronics Co.,LTD
20
1 Open the support and you can see two screws. Remove the screws and remove
the battery cover to see the battery.
Figure 47 Opening the support
2 Please take out the battery from the negative pole, and take out the whole
battery after the negative pole leaves.
3 When installing the battery, make sure that the positive pole of the battery has an
insulating tube, otherwise, please refer to the following steps to install the
insulating heat shrink tube.
1) Prepare insulating heat shrink tube of the following sizes.
Size: thickness 0.2~0.3mm, inner diameter 18~19mm, length 21mm.
2) Put it on the positive pole of the battery.
3) Use a hot air gun with the temperature of 270 ° to blow the tube for 5 seconds to
make the heat shrink tube stick to the battery.
Loading ...
Loading ...
Loading ...