Loading ...
Loading ...
Loading ...
48 GETTING TO KNOW YOUR INSTRUMENT PANEL
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON/RUN position. To turn off the message
temporarily, push and release the
MODE
button. To reset the oil change indicator system
(after performing the scheduled maintenance),
refer to the following procedure.
1. Turn the ignition switch to the ON position
(do not start the engine).
2. Fully push the accelerator pedal slowly,
three times, within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
DISPLAY SETUP MENU
The menu comprises a series of functions
arranged in a cycle. Push and release the
up or
down arrow button to access the different
options and settings (setup).
The setup menu can be activated by pushing
the
MODE button. Single pushes on the up or
down arrow button will scroll through the setup
menu options. The menu items include the
following functions:
Speed Beep
Buzzer Volume
Seat Belt Buzzer (Just Available After SBR
Disable Made By CHR Service)
Exit menu
NOTE:
If equipped, some customer programmable
features will display in the Uconnect system.
Refer to your Uconnect Owner’s Manual Supple-
ment for further information.
Selecting An Option Of The Main Menu Without
Submenu
1. Briefly push and release the
MODE
button
to select the main menu option to set.
2. Push and release the up or down arrow
button (by single pushes) to select the new
setting.
3. Briefly push and release the
MODE button
to store the new setting and go back to the
main menu option previously selected.
Selecting An Option Of The Main Menu With
Submenu
1. Briefly push and release the
MODE
button
to display the first submenu option.
2. Push and release the up or down arrow
button (by single pushes) to scroll through
all the submenu options.
3. Briefly push and release the
MODE button
to select the displayed submenu option and
to open the relevant setup menu.
4. Push and release the
up or down arrow
button (by single pushes) to select the new
setting for this submenu option.
5. Briefly push and release the
MODE button
to store the new setting and go back to the
previously selected submenu option.
6. Push and release and hold the
MODE
button to return to the main menu (short
hold) or the main screen (longer hold).
20_VF_OM_EN_USC_t.book Page 48
Loading ...
Loading ...
Loading ...