START
OPERATING INSTRUCTIONS
AUTO DRY COOL DOWN
LESS
lOO TIMED DRY
90
80
©MORE 7O
60
Before Operating Your Dryer
Readyour dryer Owner's Guide. it hasimportant safety and
warranty information. It alsohasmany suggestions for bestdrying
results.
Toreduce the risk of fire, electric shock, or injury
to persons, read the IMPORTANTSAFETYINSTRUCTIONSin your
dryer owner's guide before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's Guide. It explains
these operating steps in detail.
1. Prepare items for drying.
10
20 e
30
5O
O4O
Timed Dry
This cycleprovides up to 100 minutes of drying time athigh heat
for regular and permanent press items.
When drying permanent pressitems, turn the cycleselectorto 40-
50 minutes. This isthe average time needed to dry most loads of
permanent press items.
The load tumbles without heat during the last 10 minutes of the
Timed Dry cycle. Use this setting to freshen clothing, pillows or
blankets or to dust draperies. Heat-sensitive items such as
plastics,foam rubber or similarly textured rubber-like materials or
items containing feathers or down should be dried onlywith this
setting.
2. Check that tint screen is dean and in place.
3, Loadthedryer, If desired, add a dryer fabric softener sheet.
4. Close the dryer door.
5. Turn cycle selector clockwise to desired setting.
6, Start dryer, Pushthe Pushto Start button for 2 seconds, or
turn the Turn to Start control clockwise to ON. Holdfor 1-
2 seconds and release.
7. At end of cyde, remove items immediately and hang or
fold.
8. Clean lint screen after every load.
Cycle Selection
Always follow directions on fabric care labels.
Toavoid fire hazard, do not useheat to dry items
containing feathers or down, foam rubber, plastics, or similarly
textured, rubber-like materials. UseCool Down (no heat) setting
only.
Turn cycle selector clockwise to desired cycle and setting. Each
cycleendswith a cool down period. Theheat automatically turns
off and the load continues to tumble for 5-10 minutes. This
reduces wrinkling and makes items easier to handle during
unloading. Drying time varies depending on sizeand dampness
of load,weight and fabric type. Roomtemperature and humidity,
type of installation and electrical voltage or gaspressure can also
affect drying time.
Auto Dry
This cycle isbest for regular and permanent press items that can
be tumble dried at high heat. Drying time is determined
automatically.
Thiscycleisbestfor itemsof similarfabric, weight and construction.
• For items requiring more drying time, set cycle selector on
MORE DRY
Foritems requiring lessdrying time, set cycleselector on LESS
DRY
When the items are dry, the heat automatically turns off and the
load istumbled for approximately 5 minutes without heat.
Energy Saving Tips
Keep the lint screen clean and exhaust the dryer correctly.
Sort laundry properly and select proper temperature and cycle
settings. Choose an automatic drycycle whenever possible for
accurate drying time.
Dry only full loads. Single items and small loads usually take
longer to dry.
Avoid overloading, adding wet itemsto apartially dry load, and
overdrying.
Dry one load after another to take advantage of awarm dryer.
Opening the door needlesslycauseswarm airto escape,which
prolongs drying time.
If possible, usethe dryer on low humidity days.
Install the dryer in an area where the room temperature is at
least 45% (7°C).
P/N137103300 (0806)
Loading ...
Loading ...
Loading ...
