Loading ...
Loading ...
Loading ...
en-us Troubleshooting
44
Issue Cause and troubleshooting
Wipeable or water-
soluble coatings in-
side the appliance
or on the door.
1. Adjust the water softening system correctly.
→
"Setting the water softening system",
Page20
In most cases you will need to increase the
setting.
2. If necessary, change your detergent.
Special salt dispenser is not screwed tight.
▶ Screw the special salt dispenser tight.
There are stubborn
white coatings on
the dishware, inside
the appliance or on
the door.
There is detergent residue. These coatings can-
not generally be removed with chemicals.
▶ Change your Detergent.
▶ Scrub the appliance by hand.
Hardness range is set incorrectly or the water
hardness is too high.
▶ Set the Water softening system to the water
hardness or add special salt.
3in1/organic/eco detergent is not effective
enough.
▶ Set the Water softening system to the water
hardness and use separate detergents (name
brand, special salt, rinse aid).
Too little detergent is being used.
▶ Increase the amount of detergent used or
change Detergent .
Selected wash cycle is too light.
▶ Select a more intensive wash program.
Tea residue or lip-
stick marks on dish-
ware.
Dishwashing temperature is too low.
▶ Select a program with a higher dishwashing
temperature.
Too little detergent is being used or is unsuitable.
▶ Use a suitable Detergent and follow the manu-
facturer's instructions for the amount to be
used.
Dishware has been precleaned too intensively.
Then the sensors choose a lighter cycle. Stub-
born remnants cannot be entirely removed.
▶ Only remove large remnants of food and do not
pre-rinse dishware.
Loading ...
Loading ...
Loading ...