Loading ...
Loading ...
Loading ...
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.
13
NOTE
Tighten all set screws so the screw is below the surface of the handle. Draw the
handles tight to the doors/drawer with no gaps. Open the opposite door while
tightening the Allen screw to make installation easier.
The door handle may loosen over time if you installed it improperly. If this happens,
tighten the set screws on the handles.
Door Handle Mounting Instructions
Mounting Refrigerator Handles
DOOR HANDLE INSTALLATION
NOTE
When tightening the Allen set screws, you must apply force to the longer arm of
the Allen wrench supplied in the handle packaging.
1. Remove the handles from the carton
and any other protective packaging.
2. Position the fresh food handle
end caps over the upper and
lower pre-installed shoulder bolts
(A) fastened into door, ensuring
the holes for the set screws are
facing toward the opposite door.
3. While holding the handle firmly
against door, fasten the upper
and lower Allen set screws (B)
with the supplied Allen wrench.
4. Repeat steps 2 and 3 to install
the opposite handle. Ensure
the holes for the set screws are
facing toward the first door.
Loading ...
Loading ...
Loading ...