Loading ...
Loading ...
Loading ...
5. Clean the inner surface of the protective cover with a
brush.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
Troubleshooting
Keypad
Problem Possible faults Possible solution
Green activate LED
flashing
Low battery voltage. Charge the battery.
The warning indicator
flashes.
Overload. The cutting attachment is blocked. stop the
product. Remove the battery. Clean the cut-
ting attachment from unwanted materials.
Loosen the chain.
Temperature deviation. Let the product become cool.
The power trigger and the start button are
pushed at the same time.
Release the power trigger and push the start
button.
The product does not
start.
Dirt in the battery connectors. Clean the battery connectors with com-
pressed air or a soft brush.
The warning indicator
is on.
It is necessary to do servicing on the product. Speak to your servicing dealer.
Battery
Problem
Possible faults Possible solution
Green LED flashes. Low battery voltage. Charge the battery.
Error LED flashes. The battery is empty. Charge the battery.
Temperature deviation. Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Overvoltage. Remove the battery from the battery charger.
Error LED comes on. Cell difference is too much (1V). Speak to your servicing dealer.
Battery charger
Condition
Possible faults Possible procedure
The charging LED is red. Permanent battery charger error. Speak to your dealer.
26 707 - 011 - 31.10.2022
Loading ...
Loading ...
Loading ...