Loading ...
Loading ...
Loading ...
MIG-S2 SERIES PANEL INTRODUCTION
○
1 , Over-Heat Alarm ○
2 , Power Indicator ○
3 ,Welding Current Display
○
4, MIG Welding Voltage Display ○
5, Switch for mode of MMA/LIFT-TIG/MIG
○
6 , Welding Wire Inching ○
7 , MMA Welding Current Adjustment
○
8 , MIG Burnback Function ○
9 , MIG Voltage Adjustment ○
10 ,MIG Wire Speed Adjustment
○
11 , Polarity Conversion Cable Connector,
Note: VERY IMPORTANT!
A), When use gas welding (solid wire), Install ○
11 into ○
12 , and install earth clamp with
cable into○
13 .
A), When use gasless welding (Flux wire), Install ○
11 into ○
13 , and install earth clamp
with cable into○
12 .
○
12 , Positive Polarity Connector (+) ○
13 , Negative Polarity Connector(-)
○
14 , MIG Welding Torch ○
15 , Power Switch for ON/OFF. ○
16 , Gas Hose Inlet Connector
○
17 , Power Cable with Plug.○
18 , Ground Nut. ○
19 built-in cooling fan and ventilation.
Loading ...
Loading ...
Loading ...