Loading ...
Loading ...
Loading ...
54
2) Tap on the action that has been carried out to continue.
3) In the following step, the screen will remind you that the fault memory of the parking
brake control unit will be deleted, press Continue to proceed or the Back button to
exit.
4) Follow the on-screen instructions to pull the parking brake button and wait for around
3 seconds until the parking brake is set. When the operation is successfully
completed, a “Completed successfully” message will appear on the screen. Press
“OK” to exit.
Parking Brake: Workshop Mode
This service is used to activate and deactivate the so-called installation position for the
Automatic Hold brake. In this mode the parking brake is moved into the opened position
and temporarily deactivated for personal protection.
The installation position must be activated for the following repairs:
Figure 7-7 Sample EMF Start-up Screen 2
Figure 7-8 Sample EMF Start-up Screen 3
Loading ...
Loading ...
Loading ...