Loading ...
Loading ...
Loading ...
Lockengaged
for door removaJ
Figure 1
HmNGESLOT
Door removed from the range
Figure 2
Lock in normaJ
position
Figure 3
Care and Cleaning of Stainless Stee (Stainless Steel modelsonly)
Some modeUsare equipped with stainUesssteeUexterior parts, SpeciaUcare and cUeaningare
required for maintaining the appearance of stainUessparts, PUeaserefer to the tame provided
at the beginning of the GeneraJ Care & Cleaning section in this Use & Care Guide,
Removing and Replacing the Oven Door
_The door isheavy, For safe, temporary storage, lay the door fiat with the inside
of the door facing down,
To Remove Oven Door:
1, Open the door to the fully opened position,
2, Pull up the lock located on both hinge supports and engage it in the hinge levers
(Figure 1),You may have to apply a little downward pressure on the door to pull the
locks fully over the hooks,
3, Grab the door by the sides, pull the bottom of the door up and toward you to disengage
the hinge supports, Keep pulling the bottom of the door toward you while rotating the top
of the door toward the range to completely disengage the hinge levers (Figure 2),
4, To clean oven door, follow the instructions provided in the General Care & Cteaning
table,
To Replace Oven Door:
1, Grab the door by the sides; place the hinge supports in the hinge slots, Open the door to
the fully opened position,
2, Disengage the lock from the hinge levers on both sides (Figure 3),
Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers,
3, Close the oven door,
Specia_ Door Care mnstructions - Most oven doors contain glass that can break,
Read the following recommendations:
1, Do not close the oven door until all the oven racks are fully in place,
2, Do not hit the glass with pots, pans, or any other object,
3, Scratching, hitting, jarring or stressing the glass may weaken its structure causing an
increased risk of breakage at a later time,
17
Loading ...
Loading ...
Loading ...