Loading ...
Loading ...
Loading ...
2322
Cleaning the NutriBullet
Juicer™ is quick and easy.
All components except for the
Food Pusher and Motor Base
are dishwasher safe. Read on
for some cleaning tips and
best practices.
1 Always ensure the Motor
Base is unplugged before
you begin assembly,
disassembly, cleaning or
storage of the unit.
2 Once the Pulp Basin is
emptied, rinse all parts
under running water.
3 Use the Cleaning Brush
to scrub the Sieve under
running water. Be sure to
properly clean the Sieve
every time you juice, as
minerals from fruits and
vegetables can cause
build-up in the Sieve which
may prohibit maximum
juice extraction.
WARNING: Always use precaution
when cleaning the Sieve, as it
contains sharp blade teeth on
the flat disc part.
TIP
: Always clean the Sieve as
soon as possible after juicing using
the Cleaning Brush. If allowed to
sit, pulp will dry on the Sieve and it
will become more dicult to scrub
blocked holes. If this happens, be
sure to allow the Sieve to soak in
hot water for 30 minutes.
4 All Juicer components
except the Motor Base are
dishwasher safe. You may
also hand wash with warm
soapy water.
TIP: Do not use the Sterilize cycle on
your dishwasher to clean your juicer
as it may cause parts to deform.
5 Wipe down Motor Base
with a clean, damp cloth.
WARNING: Never submerge Motor
Base into water or other liquid.
Care & maintenance.
5 Remove the Food Pusher by
lifting it out of the feed chute.
6 Lift the Basin Cover vertically
o of the Pulp Basin and
remove any pulp from the
inside of the cover. You
may use the flat end of the
Cleaning Brush to scrape
pulp o of the cover.
7 Gently lift the Sieve
vertically out of the center
of the Pulp Basin. Clean
the Sieve right away
(see care instructions).
8 Empty the Pulp Basin. Use
the flat end of the Cleaning
Brush to easily scrape out
the pulp and set it aside
for use in other recipes or
composting. You can also
empty the pulp into your
waste bin or compost.
Loading ...
Loading ...
Loading ...