User Manual
60 cm Hybrid Cooktop, Model Code: TRCI603
Please read this manual carefully before using, and keep it for future reference.
P a g e | 2
INSTRUCTION MANUAL
60cm Hybrid Cooktop
MODEL TRCI603
Congratulations on the purchase of your new Hybrid Hob!
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install and operate it correctly. For
installation, please read the installation section. Read all the safety instructions
carefully before use and keep this Instruction / Installation Manual for future
reference.
ONLINE: TRINITYAPPLIANCES.COM.AU
P a g e | 3
ONLINE: TRINITYAPPLIANCES.COM.AU
CONTENTS
1. PACKAGE
.................................................................................................................................................................
4
1.1 IMPORTANT - CHECK FOR ANY DAMAGE OR MARKS
.........................................................................
4
1.2
BEFORE USING YOUR NEW HYBRID HOB
..................................................................................................
4
2. SAFETY WARNINGS
................................................................................................................................................
5
2.1 IMPORTANT INFORMATION
.........................................................................................................................
5
2.2 WARNING!
.......................................................................................................................................................
5
2.3 USAGE CONDITIONS AND RESTRICTIONS
................................................................................................
5
3. PRODUCT OVERVIEW
............................................................................................................................................
8
3.1 TOP VIEW
.........................................................................................................................................................
8
3.2 CONTROL PANEL/USER INTERFACE
...........................................................................................................
9
3.3
A WORD ON HYBRID COOKING..............................................................................................................
10
4. INSTALLATION
.......................................................................................................................................................
11
4.1 SELECTION OF INSTALLATION EQUIPMENT
............................................................................................
11
4.2 INSTALLATION
...............................................................................................................................................
13
4.3
CAUTIONS
......................................................................................................................................................
14
4.4
CONNECTING THE HOB TO THE MAIN POWER SUPPLY
......................................................................
15
5.
USING YOUR COOKTOP
.....................................................................................................................................
16
5.1
CHOOSING THE RIGHT COOKWARE
......................................................................................................
16
5.2
USING TOUCH CONTROLS
........................................................................................................................
17
5.3
START OPERATION
.......................................................................................................................................
17
5.5
CHILD LOCK FUNCTION
.............................................................................................................................
18
5.6
USING THE TIMER
..........................................................................................................................................
19
6.
TROUBLESHOOTING
.............................................................................................................................................
22
7.
TECHNICAL SPECIFICATIONS
............................................................................................................................
23
8.
DISPOSAL
...............................................................................................................................................................
23
9.
CUSTOMER CARE
..................................................................................................................................................
24
5.4
WHEN YOU HAVE FINISHED COOKING
..................................................................................................
18
5.7
USING THE COOKING AND PAUSE FUNCTION
................................................................................... .
20
5.8
FLEXIBLE AREA
...............................................................................................................................................
20
5.9
USING THE BOOST FUNCTION
...................................................................................................................
21
P a g e | 4
ONLINE: TRINITYAPPLIANCES.COM.AU
1. PACKAGE
When unpacking the appliance, please check that the following
items are contained within the package:
• 1 Hob
• 1 Instruction manual
• 4 Fixing screws
• 4 Fixing brackets
• 1 Sealing strip
1.1 IMPORTANT - CHECK FOR ANY DAMAGE OR MARKS
Please thoroughly inspect your goods at the delivery time, if you notice
any damage to your goods:
− please notify the delivery team at the time of delivery and
DO NOT accept damaged product;
− please notify us immediately, as the problem can be solved,
and damaged product can be returned to the courier.
When you open the package and find the appliance is damaged or
marked, you must report it within 24 hours. Do not install or connect
the item and keep the package as it was originally if you wish to
claim for damage/marks under the manufacturer’s warranty. This does
not affect your statutory rights.
Evidence of damage will be required.
1.2 BEFORE USING YOUR NEW HYBRID HOB
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Hybrid hob.
P a g e | 5
ONLINE: TRINITYAPPLIANCES.COM.AU
2. SAFETY WARNINGS
2.1 IMPORTANT INFORMATION
Your safety is important to us. Please read this manual thoroughly before
you start using the Hybrid Cooktop.
The safety precautions instructions reduce the risk of fire, electric shock and
injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
2.2 WARNING!
INSTALLATION: This Cooktop must be installed by a licensed electrician.
• Make sure to have this appliance connected to a well-placed earth
wiring system. Before carrying out any work, repairs or maintenance on this
appliance, it has to be disconnected from the mains. If possible, switch of
the cooktop from the wall before cleaning, failure to do so may result in
electric shock or death.
• During use be sure to avoid any direct contact with the surface as you may get
burned. Always use this appliance with caution. Do not touch any
components of the cooktop as it will be hot. It is highly recommended that
you use cooktop gloves when handling cookware.
• Do not leave any items on the cooktop as this is a fire hazard. In the case of
a fire do not use a fire extinguisher with water. It is highly recommended that
you switch off the cooktop and cover the flames with a fire blanket.
• Supervision over children is to ensure that they do not play with the
appliance. Never allow them to use, play with or crawl inside the appliance.
• Cleaning and maintenance must not be done by children.
• This appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless under responsible supervision and instruction to ensure
appliance hazards are understood.
• Make sure to read all rules and regulations in this manual. Anyone who is
not familiar with this appliance is not to operate it. These instructions do not
cover every possible situation or condition as with any appliance. Use
extreme caution when installing, operating and maintaining this appliance.
• Never leave the cooktop unattended while in use.
2.3 USAGE CONDITIONS AND RESTRICTIONS
P a g e | 6
ONLINE: TRINITYAPPLIANCES.COM.AU
• Only for indoor domestic use only. It is not to be used for industrial or commercial
use.
• Do not use this product for anything other than its intended purpose, and only
use it as described in this manual. Do not attempt to alter or modify this
appliance.
• This appliance can become extremely hot and therefore children and pets are
to be kept away. If younger family members are in the kitchen, be sure
to keep close supervision at all times. Do not allow children to operate or play
with this appliance.
• Do not use the cooktop for heating up the area.
• Make sure you do not use the appliance if any part has been damaged. It
must only be repaired by a qualified technician. Incorrect repair could
expose you to risk of electric shock, fire or injury. If you continue to use the
product in such condition it could cause fire or electrocution.
• The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
• Do not store items on the cooking surfaces
• Caution: The cooking process has to be supervised; a short-term cooking process
has to be supervised continuously.
• Warning: Unattended cooking on a hob with fat or oil can be dangerous
and may result in a fire.
• Do not use any unstable or plastic cookware products or aluminium foil
containers. No large cookware is to overlap bench as this can deflect heat
back onto the cooktop and damage the surface. Cookware products can
become hot while in use with this appliance. Be sure to position handles away
from reach of children.
• Make sure not to switch on hotplate without anything on it, do not use
cooktop to warm up plates.
• Do not place anything heavier then 20kgs on the cooktop.
• Checking constantly when frying food to ensure that oil is not
overheating and becomes a fire hazard. Do not overfill deep fry pans with oil
(more than one third) and be sure not to leave unattended.
• Make sure to switch off all controls when not in use and allow surface to cool
before cleaning.
• If accessible, disconnect the appliance from the mains before cleaning.
• Do not cover the appliance or power cord in water or other liquids.
• Do not use any steam cleaning products for the cleaning of this appliance.
• Do not disconnect the appliance by using wet hands, gripping end of plug or
forcefully pulling cord to disconnect. Grip end of plug, and do not pull cord to
disconnect.
• Do not use appliance if there is a technical fault. All faults must be
fixed by a qualified/authorised person.
• Incorrect use can result in property damage, injury or death. We assume no
liability for misuse of the appliance or noncompliance with these instructions.
• WARNING! If the surface cracks, switch of the appliance immediately to
avoid the possibility of electric shock and call our customer support.
P a g e | 7
ONLINE: TRINITYAPPLIANCES.COM.AU
• Be careful when using this cooktop, as the cooktop complies with all safety
regulations, we do not wish for customers to burn themselves as the surface will
become extremely hot during use and will retain heat after use.
• Please remember to allow for the cooktop to cooldown before attempting to
clean.
• Young children should be kept away from this appliance at all times! Take
extreme caution when using the appliance to ensure they do not come
anywhere close the cooktop.
• Do not leave any items on top of the cooktop as these can become a fire
hazard.
• This appliance is not intended to be operated by means of an
external timer or separated remote control system.
P a g e | 8
ONLINE: TRINITYAPPLIANCES.COM.AU
3. PRODUCT OVERVIEW
3.1 TOP VIEW
Heating Zone Power
Heating Zone
Max. Power (220V~)
2000/2300W(Booster)
1500/2000W(Booster)
2300/1150W(Inner ring)
5800W
Total Rating Power
P a g e | 9
ONLINE: TRINITYAPPLIANCES.COM.AU
3.2 CONTROL PANEL/USER INTERFACE
Reference Description
A
ON/OFF key
B
C
Timer control keys &Timer
setting indicator
D
Power slider regulating key
E
F
Child lock key
Pause key
D
E
F
Boost control key
G
Dual circuit control key
H
Timer setting indicator
I
J
Power level indicator
Cooking functions key
K
Timer Indicator
L
Cooking functions indicator
P a g e |10
ONLINE: TRINITYAPPLIANCES.COM.AU
3.3 A WORD ON HYBRID COOKING
Hybrid cooking is a safe, advanced, efficient, and economical cooking
technology. It works by electromagnetic vibrations generating heat
directly in the pan, rather than indirectly through heating the glass
surface. The glass becomes hot only because the pan eventually warms
it up.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the
Hybrid hob. When an excessive temperature is monitored, the Hybrid
hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some
other small item (e.g. knife, fork, key) has been left on the hob, the hob
automatically go on to standby in 1 minute. The fan will keep cooking
down the induction hob for a further 1 minute.
Auto shutdown protection
Auto shut down is a safety protection function for your Hybrid hob. It shut
down automatically if ever you forget to turn off your cooking. The
default working times for various power levels are shown in the below
table: .
Power level 1~3 4~6 7~8 9
Default working timer (min) 360
180 120
90
When the pot is removed, the Hybrid hob can stop heating
immediately and the hob automatically switch off after 2 minute.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
People with a heart pace maker should consult with their doctor
before using this unit.
Iron pot
Magnetic circuit
Ceramic glass plate
Induction coil
Induced currents
P a g e |11
ONLINE: TRINITYAPPLIANCES.COM.AU
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
4. INSTALLATION
4.1 SELECTION OF INSTALLATION EQUIPMENT
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space
shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please
select heat-resistant work surface material to avoid larger deformation
caused by the heat radiation from the hotplate. As shown below:
H
SEAL
W
D
L
X
B
X
X
A
X
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm)
590
520
58 54
565
495
50 minimum
Under any circumstances, make sure the Hybrid cooker hob is well
ventilated and the air inlet and outlet are not blocked. Ensure the
Hybrid cooker hob is in a good work state. As shown below:
Note: The safety distance between the hotplate and the
cupboard above the hotplate should be at least 760 mm.
P a g e |12
ONLINE: TRINITYAPPLIANCES.COM.AU
A (mm) B (mm) C (mm) D E
760 50 minimum 20 minimum Air intake Air exit 5 mm
D
C
B
E
A
Before you install the hob, make sure that:
the work surface is square and level , and no structural members
interfere with the space requirements;
the work surface is made of a heat-resistant material;
if the hob is installed above an oven, the oven has a built-in cooling fan;
the installation will comply with all clearance requirements and
applicable standards and regulations;
a suitable isolating switch providing full disconnection from the main
power supply is incorporated in the permanent wiring, mounted and
positioned to comply with the local wiring rules and regulations. The
isolation switch must be of an approved type and provide a 3 mm air
gap contact separation in all poles (or in all active [phase]
conductors if the local wiring rules allow for this variation of the
requirements);
the isolating switch will be easily accessible to the customer with the hob
installed;
you consult with the local building authorities and by-laws if in
doubt regarding the installation;
you use heat-resistant and easy-to-clean finishes (such as ceramic
tiles) for the wall surfaces surrounding the hob.
P a g e |13
ONLINE: TRINITYAPPLIANCES.COM.AU
When you have installed the hob, make sure that:
SILICONE
SILICONE
Cut out worktop to supplied dimensions shown(fig.1) with suitable
equipment. Seal the cut edge of the worktop using silicone PTFE and allow
to dry prior to fitting the hob.
the power supply cable is not accessible through cupboard doors or drawers;
there is adequate flow of fresh air from outside the cabinetry to the base of
the hob;
if the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob;
the isolating switch is easily accessible.
fig.1
fig.2
Stretch out the supplied seal along the underside edge of the
hob,ensuring the ends overlap.
4.2 INSTALLATION
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
locating the fixing brackets
• The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
P a g e |14
ONLINE: TRINITYAPPLIANCES.COM.AU
fig.3
fig.4
Do not use adhesive to fix the hob into the worktop.Once the seal is fitted
position the hob into the cutout in the worktop. Spply gentle downwards
pressure onto the hob to push it into the worktop ensuring a good seal
around the outer edge(fig.4)
4.3 CAUTIONS
1. The Hybrid hotplate must be installed by qualified personnel or
technicians. We have professionals at your service. Please never
conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge,
freezer, washing machine or clothes dryer, as the humidity may
damage the hob electronics
3. The Hybrid hotplate shall be installed such that better heat
radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall
withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
P a g e |15
ONLINE: TRINITYAPPLIANCES.COM.AU
4.4 CONNECTING THE HOB TO THE MAIN POWER SUPPLY
This hob must be connected to the mains power supply only by a
suitably qualified person. Before connecting the hob to the mains power
supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on
the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75°C at any point.
Check with an electrician whether the domestic wiring system is
suitable without alterations. Any alterations must only be made by a
qualified electrician.
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or
Earth
IMPORTANT:
• If the cable is damaged or needs replacing, the operation must be carried
out by the after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains supply, an
omni polar circuit breaker must be installed with a minimum gap of 3
mm between the contacts.
• The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised
technicians only.
This appliance requires a 32 Amp Miniature Circuit Breaker.
P a g e |16
ONLINE: TRINITYAPPLIANCES.COM.AU
5. USING YOUR COOKTOP
Before using your new Hybrid Hob
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Use pans whose diameter is as large as the
graphic of the zone selected.Using a pot a slightly wider energy will be used at
its maximum efficiency.If you use smaller pot efficiency could be less than
expected.Pot less than 140 mm could be undetected by the hob. Always
centre your pan on the cooking zone.
Always lift pans off the Hybrid hob – do not slide, or they may scratch the glass.
• Read this guide taking special note of the “Safety Warnings” section.
• Remove any protective film that may still be on your Hybrid Hob.
• Only use cookware with a base suitable for Hybrid
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
• You can check whether your cookware is suitable by
carrying out a magnet test. Move a magnet towards the
base of the pan. If it is attracted, the pan is suitable for
Hybrid.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
• Cookware made from the following materials is not suitable: pure stainless steel,
aluminum or copper without a magnetic base, glass, wood, porcelain, ceramic,
and earthenware.
5.1 CHOOSING THE RIGHT
COOKWARE
P a g e |17
ONLINE: TRINITYAPPLIANCES.COM.AU
• The controls respond to touch, so you don’t need to apply any
pressure.
• Use the ball of your finger, not the tip.
• You will hear a “beep” buzzer sound each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is
no object (e.g. a utensil or a cloth) covering them. Even a thin
film of water may make the controls difficult to operate.
1. Touch the ON/OFF key control for 3 secnds.
After power on, the buzzer beeps once, all displays show
“ – “, indicating that the Hybrid hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone that you wish
to use.
Make sure the bottom of the pan and the surface Of the
cooking zone are clean and dry.
3. According to the heating zone where the pan is placed,
adjust heat setting by touching the slider regulating key(E)
control.
5.2 USING TOUCH CONTROLS
5.3 START OPERATION
To start cooking
P a g e |18
ONLINE: TRINITYAPPLIANCES.COM.AU
• If you do not choose a heat setting within 20 seconds, Hybrid hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
5.5 CHILD LOCK FUNCTION
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
1.Touch and hold the keylock control for a while
2.You can now start using your Hybrid hob.
To lock the controls
Touch the child lock key
for 3 seconds. The indicator above the child
lock key will be on and the timer indicator will show “Lo “
To unlock the controls
alternately with the heat settingIf the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for Hybrid cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
5.4 WHEN YOU HAVE FINISHED COOKING
1.Touching the slider regulating key(E) to decrease the power to “0” level.
2.Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that is
still hot.
When the hob is in the lock mode, all the controls are
disabled, except the ON/OFF. You can always turn the Hybrid
hob off with the ON/OFF control in an emergency, but you shall
unlock the hob first in the next operation
P a g e |19
ONLINE: TRINITYAPPLIANCES.COM.AU
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
Using the Timer as an alarm
1. After selecting the cooking zone and the power level required，the dot
next topower level indicator will flash for 5 seconds.
or , you 2. When the dot stops flashing, touch the timer control key
can realize the setting of timing from 1 to 99 minutes.
Hint: Touch the “-“ or ”+” control of the timer once to decrease or increase by 1
minute.
Touch and hold the “-“or ”+” control of the timer to decrease or increase by 10
minutes.
3. When the time is set, it will begin to count down immediately. The display will show
the remaining time，and the dot next to timer indicator will keep on flashing.
4. Buzzer will bips and the timer indicator will turn off when the setting time finished.
Setting the timer to switch off zones
1. Selecting the relevant cooking zone by touching the power slider regulating key
to set the power lever you required,the dot next to power level indicator will flash for
5 seconds.
or , you can
2.
Before the dot stops flashing, touch the timer control key
realize the setting of timing from 1 to 99 minutes.
Hint: Touch the “-“ or “+” control of the timer once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+”control of the timer will decrease or increase by 10
minutes.
3. When the time is set, it will begin to count down immediately. The timer setting
indicator will show the remaining time and the timer indicator will flash for 5
seconds.
4. After that, if the indicator will keep on flashing meaning that the timer setting
indicator shows the relevant zone remaining time until the timer expires; or else the
indicator will keep on lighting until the timer expires.
5.6 USING THE TIMER
You can use the timer in two different ways:
P a g e |20
ONLINE: TRINITYAPPLIANCES.COM.AU
5. When cooking timer expires, the corresponding cooking zone will be switch off
automatically. Other cooking zone will keep operating if they are turned on
previously.
6. When using “the timer as an alarm” and “the timer to switch off the zones ”
together ,the timer setting indicator will show the remaining time of alarm as first
priority. Press power slider regulating key(E) of relevant cooking zone to show the
remaining time of switch off timer.
5.7 Using Cooking and Pause Functions
You can choose 3 handy cooking functions by pressing the cooking functions
key each time moves from one function to the other.
-Melt or defrost（about 50℃）
-Heating or keeping warm （about 70℃）
-Simmering , temperature close to boiling ,useful for slow cooking
Using the Double Rings
For the ceramic burner,it is possible to control double rings.
1. When a dual cooking zone is activated, the two circuits are switched on at the
same time. Activation of the external circuit is indicated by a pilot light upon the
key .
2. If only the internal circuit is to be switched on, the external circuit can be
switched off using the dual circuit key . Press the dual circuit key again to
reactivate the external circuit and the corresponding pilot light will switch on.
Using the Pause function
The hob have a handy restart function to pause and restart the cooking
process if you’re interrupted.
, all burner 1. When the hob is on and working, press the pause key
will stop working,and all LED indicator will show the symbol “=” .
again, all setting will restart at the previous
2. Press the pause key
setting.
5.8 FLEXIBLE AREA
• This area can be used as a single zone, accordingly to the cooking needs
anytime.
• Flexible area is made of two independent inductors that can be controlled
separately. When working as a single zone, a cookware is moved from one zone to
the other one within the flexible area keeping the same power level of the zone
where the cookware originally was placed, and the part that is not covered by
cookware is automatically switched off.
P a g e |21
ONLINE: TRINITYAPPLIANCES.COM.AU
,the zone indicator show“P.” and
5.9 Using the Boost function
Actived the boost function
Touching the relevant zone boost control key
the power reach Max.
Cancel the Boost function
Touching the slider regulating key(E) to cancel the Boost
function, then the
cooking zone will revert to the power level you wish.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after 5 minutes automatic.
• Important: Make sure to place the cookwares centered on the single cooking
zone. The ideal recipe is an oval or rectangular saucepan, or a saucepan.
Examples of good pot placement and bad pot placement.
1. To activate the flexible area as a single big zone, press the power slider regulating
key of front right and rear right zones at the same time.
2. The flexible zone indicator & next to the power lever indicator will be light up.
3. According to the heating zone where the pan is placed, adjust heat setting by
touching the front left zone slider regulating key(E) control.
4. If the pot is moved from the front to the rear part (or viceversa),the flexible area
detects automatically the new position, keeping the same power.
P a g e |22
ONLINE: TRINITYAPPLIANCES.COM.AU
6. TROUBLESHOOTING
Before calling the customer services, please check that the appliance is
correctly connected, any of the following cases are not covered by the
warranty:
Damage caused by improper use, storage or maintenance
Damage caused by unauthorised disassembly and repair
Damage caused by misuse.
Using the induction hob for commercial purposes.
If an abnormality comes up, the Hybrid hob will enter the protective
state automatically and display corresponding protective codes:
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers
and damages to the Hybrid hob and please contact the supplier.
Error
Message
Possible Cause What to do
No pot or pot not suitable; Replace the pot;
ER03 Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board and
the left mainboard is fail (the cooking zone which
indicator showing “E”)
1.Connection cable not correctly plugged
or defective;
2.Replace the Mainboard.
F3E
Coil temperature sensor failure. (the cooking zone
which indicator showing “E”)
Replace the coil sensor
F4E
Mainboard temperature sensor failure. (the
cooking zone which indicator showing “E”)
Replace the mainboard
E1E
Temperature sensor of the ceramic glass plate is
high
Please restart after the induction hob cools
down.
E2 E
Temperature sensor of the IGBT is high Please restart after the induction hob cools
down.
E3 E
Abnormal supply voltage(too high)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E4 E
Abnormal supply voltage (too low)
Please inspect whether power supply is normal;
Power on after the power supply is normal.
E5 E
Temperature sensor failure(the cooking zone
which indicator showing “E”)
Connection cable not correctly plugged
or assemble defective;
P a g e |23
ONLINE: TRINITYAPPLIANCES.COM.AU
7. TECHNICAL SPECIFICATIONS
Cooktop model
TRCI603
Cooking Zones
3 Zones
Supply Voltage 220-240V~
Installed Electric Power
5800W(230V~)
Product Size L×W×H (mm)
590X520X58
Building-in Dimensions A×B (mm)
565X495
Weight and Dimensions are approximate. Because we continually strive to improve
our products, we may change specifications and designs without prior notice.
8. DISPOSAL
This appliance requires special waste disposal. For further
information regarding the treatment, recovery and
recycling of this product please contact your local
council household waste disposal service or the store of
purchase.
The packaging materials are recyclable.
P a g e |24
ONLINE: TRINITYAPPLIANCES.COM.AU
9. CUSTOMER CARE
• Please be advised that without the proof of purchase, your
warranty may not be valid, keep the receipt.
For your convenience, please record:
STORE NAME/CONTACT DETAILS: ........................................
.....…
PURCHASE DATE: ................................................. .........................
PRODUCT MODEL N: …................................................. ..............….
PRODUCT SERIAL N: ......................................................... ..............
• The warranty will be voided, if not installed by a licensed professional.
For your own protection, please record installer’s details:
Installer’s Trade Name: ..................................................................
Trade Licence N: .........................................................................….
Date of Installation: ….................................................................….
Installation Receipt: .......................................................................
For further information on the appliance, service, spare parts or to obtain dimension
and installation information, please contact our customer service or visit website.
Please have above information and documents on hands before contacting
customer service
Phone: 1300 615 001
Web: trinityappliances.com.au
