Loading ...
Loading ...
Loading ...
Problem solving guide
79
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you will not
need a service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions. You should, however, note the following:
Danger due to incorrect repairs.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Repairs must only be carried out by the Miele Professional Service Department,
a Miele authorised service agent or a suitably qualified technician in accordance
with local and national safety regulations.
Technical problems
Problem Possible cause and remedy
The dishwasher will not
start.
The door is not closed properly.
Raise the door upwards until the catch engages.
The dishwasher is not plugged in or the socket is not
switched on.
Insert the plug and switch on at the socket.
The circuit breaker has tripped.
Reset the circuit breaker in the mains fuse box
(see data plate for minimum fuse rating).
If the circuit breaker trips again, call Miele.
The dishwasher is not switched on.
Switch the dishwasher on using the sensor.
The dishwasher stops
during a programme.
The circuit breaker has tripped.
Reset the circuit breaker in the mains fuse box
(see data plate for minimum fuse rating).
If the circuit breaker trips again, call Miele.
After the programme
has started, the in-
operation indicator light
is not visible.
The reflector panel was not correctly fitted.
Refit the reflector panel correctly (see the
installation sheet).
Loading ...
Loading ...
Loading ...