Loading ...
Loading ...
Loading ...
38
CARE AND CLEANING
Removing and Replacing the Oven Door
To remove the oven door:
1. Open oven door completely, horizontal with
floor (See Figure 26).
2. Pull the door hinge locks on both left and right
door hinges down from the oven frame com-
pletely towards the oven door (Figure 27). A
tool such as a small flat-blade screwdriver may
be required.
3. Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(See Figure 28).
4. Close the door to approximately 10 degrees
from the door frame (See Figure 28).
5. Lift the oven door hinge arms over the roller
pins located on each side of the oven frame
(See Figure 29).
To replace the oven door:
1. Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(See Figure 28).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge
arm over the roller pins located on each side of
the oven door frame (See Figure 29). The hook
of the hinge arms must be fully seated onto the
roller pins.
3. Fully open the oven door, horizontal with floor
(See Figure 26).
4. Push the door hinge locks up towards and into
the oven frame on both left and right oven door
hinges to the locked position (See Figure 27).
5. Close the oven door.
Oven door
hinge
locations
L
O
C
K
Figure 26: Door hinge location
Figure 27: Door hinge Locks
about
10°
hinge
oven
door
Figure 28: Holding door for removal
roller
pin
hinge
arm
Figure 29: Replacement and location of hinge
arm and roller pin
CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light.
IMPORTANT
Special door care instructions - Most oven doors
contain glass that can break. Do not hit the glass
with pots, pans, or any other object. Scratching,
hitting, jarring, or stressing the glass may weaken
its structure, causing an increased risk of break-
age at a later time. Do not close the oven door
until all of the oven racks are fully in place.
Loading ...
Loading ...
Loading ...