Loading ...
Loading ...
Loading ...
16
BEFORE SETTING SURFACE CONTROLS
Install Burner Grates
To install burner grates, place the grates flat-side
down and align them into the cooktop recess..
Figure 5: Gently move cap for proper placement
Gas surface burner types
The cooktop is equipped with gas surface burners
with dierent BTU ratings. The ability to heat food
quickly and in large amounts increases as the burn-
er size increases.
• Small burners are best used for low-flame heat-
ing of small amounts of food.
• Standard burners can be used for most surface
cooking needs.
• The largest burner is best used for bringing
large quantities of liquid rapidly up to tem-
perature or when preparing larger quantities
of food. The large burner is located at the right
front position on the cooktop.
Regardless of size, always select cookware that
is suitable for the amount and type of food being
prepared. Select a burner and set the flame size
appropriately for the pan. Never allow flames to
extend beyond the outer edge of the pan.
IMPORTANT
• Make sure the burner grates are properly
placed on the cooktop before using the sur-
face burners (Figure 5). The grates are de-
signed to rest inside the recess on the cook-
top.
• Grates should rest flush against each other
and against the sides of the recess.
• Do not line the area underneath the grates or
any part of the cooktop with aluminum foil or
with any other lining.
Loading ...
Loading ...
Loading ...