Loading ...
Loading ...
Loading ...
Owner'sManual
HazardWarnings
Dust
WARNING!SOMEDUSTCREATEDBYPOWERSANDING,SAWING,
GRINDING,DRILLING,ANDOTHERCONSTRUCTIONACTIVITIES
CONTAINSCHEMICALSKNOWNTOTHESTATEOFCALIFORNIATO
CAUSECANCER,BIRTHDEFECTSOROTHERREPRODUCTIVEHARM.
These chemicals may include (but are not limitedto) the following:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, always wear
MSHA/NIOSH approved, properly fitting face masks or respirators when
using such tools.
Always follow basic safety precautions when using air tools to reduce the
risk of personal injury.
Bursting
Rust can weaken the tank. Drain the condensed water from the tank after
each use to reduce rusting. If a leak is detected in the tank, replace the tank
immediately. Do not weld, drill or modify the air tank of this compressor.
Welding or modifications on the air compressor tank can severely impair
tank strength and cause an extremely hazardous condition. Welding or
modifying the tank in any manner will void the warranty.
Check the manufacturer's maximum pressure rating for air tools and
accessories. Compressor outlet pressure must be regulated so as to never
exceed the maximum pressure rating of the tool. Relieve all pressure
through the hose before attaching or removing accessories.
Do not adjust the pressure switch or relief valve for any reason. Doing so
voids all warranties. They have been preset at the factory for the maximum
pressure of this unit. Personal injury and/or property damage may result if
the pressure switch or the relief valve are tampered with.
Do not use plastic or pvc pipe for compressed air. Use only galvanized steel
pipe and fittings for compressed air distribution lines.
5
Loading ...
Loading ...
Loading ...