Loading ...
Loading ...
Loading ...
AirCompressor
Compressor(cont'd)
Breaking Inthe Pump
1 Turn the pressure switch to the OFF position.
2 Open the petcock. Turn counterclockwise.
3 Plug in the power cord.
4 Turn the power switch to the ON position. The compressor will start.
Allow the compressor to run for 15 minutes, to break in the internal
parts.
_I CAUTION: AFTER ABOUT 15 MINUTES. IF THE UNIT DOES
NOT OPERATE PROPERLY. SHUT DOWN IMMEDIATELY,
AND CONTACT PRODUCT SERVICE.
5 After about 15 minutes, turn the power switch to the OFF position.
6 Close the petcock. Turn in the clockwise direction
7 Turn the power switch to the ON position. The compressor will start
and fill the tank to the kick-out pressure and stop.
_ ote: As compressed air is used, the pressure switch will restart
the motor automatically.
_ ote: During the initial break-in cycle, there willbe a slight
electrical smell as the motor brushes seat. This is normal for
universal motors and will last for about 5 minutes.
Operating Instructions
DailyStartup
1 Turn the power switch to the OFF position.
2 Close the tank petcock. Turn in the clockwisedirection.
3 Plug in the power cord.
21
Loading ...
Loading ...
Loading ...