Loading ...
Loading ...
Loading ...
Owner'sManual
HazardWarnings(cont'd)
Riskof Injury(cont'd)
• Use only impact grade sockets on an impact wrench.
• Do not apply excessive force to the tool. Let the tool perform the work.
• Never point discharge of tool at self or others.
• Do not pull trigger unless tool contact safety device is against work
surface.
• Never attempt to drive fasteners into hard surfaces such as steel,
concrete, or tile when using air tools.
• Take care to avoid driving a fastener on top of another fastener.
• Position tool carefully so that fasteners will be delivered to the proper
location.
• Use only accessories identified by the manufacturer to be used with
specific tools.
• Maintain the tool with care.
• Keep a cutting tool sharp and clean. A properly maintained tool, with
sharp cutting edges reduces the risk of binding and is easier to control.
• Check for misalignment of binding or moving parts, breakage of parts,
and any other condition that effects the tool's operation. If damaged,
have the tool serviced before using.
• Use of an accessory not intended for use with the specific tools
increases the risk of injury to persons.
• Always shut off the compressor, remove the plug from the outlet, and
bleed all pressure from the system before servicing the compressor, and
when the compressor is not in use.
• Do not operate the unit with the shroud removed.
11
Loading ...
Loading ...
Loading ...