Loading ...
Loading ...
Loading ...
15
3. Check the blade.
a. If the blade is blunt or has minor wear, then resharpen.
b. If the blade shows signs of major wear or damage
(i.e. gouged, bent), replace.
mWARNING! An excessively vibrating mower indicates
that the blade is not properly balanced or has become
deformed from striking an object. In this case, the blade must
be repaired or replaced. Please follow the proper maintenance
procedures for blade care.
Blade Replacement
IMPORTANT: Only use original replacement parts specied
for this mower. The use of parts that do not meet the original
equipment specications may lead to improper performance
of the lawn mower, may compromise operator safety.
1. Remove the batteries and the safety key from the mower.
2. Turn the mower on its side to expose the underside of the
blade housing.
3. Use a cloth to grip the blade or wear heavy-duty gloves.
4. Using a 13 mm wrench (not provided), remove the
blade nut securing the blade by turning the nut
counterclockwise, then carefully remove the blade
(Figs. 16 to 17).
5. Fit the new blade on the same position by inserting the
2 small studs on the motor inside the holes of the blade,
and secure with the original blade nut.
Storage
Follow the steps below to prepare the lawn mower for storage:
1. Remove the batteries and the safety key from the
battery compartment.
2. Remove the grass collection bag. Engage the height
adjustment lever in the lowest cutting height slot.
3. Clean the mower with a damp cloth or hand brush.
4. Inspect the mower carefully for worn, loose or damaged
parts. Check connections and screws and tighten if
necessary. Pay special attention to the mower blade and
replace/sharpen if it shows signs of wear. Refer to the
Maintenance and Care section.
5. Store the mower indoors in a dry, clean and cool area
out of the reach of children. Do not store the unit next to
corrosive materials, such as fertilizer and rock salt.
6. Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower,
which can damage the unit.
7. The handle on your lawn mower can be completely folded
for compact storage. Start by ip down all of the handle
latches and fold down the upper handle frame. Then lower
the lower handle frame completely (Fig. 18).
Disposal
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards or keep
it for long-term storage.
Fig. 16
Blade
13 mm
wrench
Fig. 17
Blade nut
Insert the
studs into the
holes
Fig. 18
Loading ...
Loading ...
Loading ...