Lexmark MS711DN User's Guide PDF Lexmark MS710, MS711

Loading ...

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support

Web site at

http://support.lexmark.com or contact customer support, and then report the message.

If necessary, press

on the printer control panel to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

• From the printer control panel, press to clear the message.

• Decrease the resolution setting.

• Install additional printer memory.

Misfeed cleared, extra sheets in output bin [24y.xx]

Press to clear the message and continue printing.

Network [x] software error [54]

Try one or more of the following:

• From the printer control panel, press to clear the message and continue printing.

• Turn o the printer, wait for about 10 seconds, and then turn the printer back on.

• Update the network ﬁrmware in the printer or print server. For more information, visit the Lexmark

support Web site at

http://support.lexmark.com.

Non‑Lexmark [supply type], see User’s Guide [33.xy]

Note: The supply type can be toner cartridge or imaging unit.

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-

party supplies or parts may

aect

the performance, reliability, or life of the printer and its imaging

components. For more information, see

“Using genuine Lexmark parts and supplies” on page 137.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable

results if third-party supplies or parts are used. Imaging component usage beyond the intended life may

damage your Lexmark printer or associated components.

Warning—Potential Damage: Use of third-party supplies or parts can

aect

warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your

printer, press

and on the control panel simultaneously for 15 seconds to clear the message and

continue printing.

Troubleshooting 182

Loading ...

Lexmark MS711DN